Ipe path_params

MAX_TURNS_EXHAUSTED

skill-flow-ipe-path_params · run 2026-04-22_20-39-58

Score: 0.50
Duration: 513.6s
Cost: $1.742
Final status: MAX_TURNS_EXHAUSTED
Tool calls: 50

uipath-maestro-flowintegrationconnector-featurepath-params

Prompt

Create a new Flow project called "PathParamsTest" with a manual trigger.
You need a flow that deletes a single task from a specific Google Tasks list.
Discover the right delete operation and provide both the task list ID (path
parameter) and the task ID.
Add a Decision node to check whether the call succeeded.
Route failure to a Terminate node with error message "PathParams test failed".
Route success to a final action that logs "PathParams test passed".
Validate the final flow file.

Success criteria (4)

PASSFlow file exists and is valid JSONscore 1

Command: python3 -c "import json,glob; flows=glob.glob('**/PathParamsTest*.flow',recursive=True); assert flows, 'No flow found'; f=json.load(open(flows[0])); assert 'nodes' in f and 'edges' in f; nn=len(f['nodes']); ne=len(f['edges']); print('OK: %d nodes, %d edges'%(nn,ne))"
Exit code: 0 (expected: 0)
Stdout:
OK: 7 nodes, 5 edges

Stderr: (empty)

FAILFlow has a connector node referencing uipath-google-tasksscore 0

Command: python3 -c "import json,glob; flows=glob.glob('**/PathParamsTest*.flow',recursive=True); assert flows; content=open(flows[0]).read(); assert 'uipath-google-tasks' in content, 'Connector key not found'; print('OK: connector key present')"
Exit code: 1 (expected: 0)
Stdout: (empty)
Stderr:
Traceback (most recent call last):
  File "<string>", line 1, in <module>
    import json,glob; flows=glob.glob('**/PathParamsTest*.flow',recursive=True); assert flows; content=open(flows[0]).read(); assert 'uipath-google-tasks' in content, 'Connector key not found'; print('OK: connector key present')
                                                                                                                                     ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
AssertionError: Connector key not found

PASSFlow has Decision and Terminate nodesscore 1

Command: python3 -c "import json,glob; flows=glob.glob('**/PathParamsTest*.flow',recursive=True); assert flows; f=json.load(open(flows[0])); types=[n.get('type','') for n in f['nodes']]; assert any('decision' in t.lower() for t in types), 'No Decision node'; assert any('terminate' in t.lower() for t in types), 'No Terminate node'; print('OK: Decision and Terminate nodes present')"
Exit code: 0 (expected: 0)
Stdout:
OK: Decision and Terminate nodes present

Stderr: (empty)

FAILuip flow validate was calledscore 0

Matched 0/1 required commands (filters: tool_name=Bash, pattern=/uip\s+flow\s+validate/)

Command timeline (50)

agent tool calls in order

1.Skilluipath:uipath-maestro-flow
2.BashResolve uip binary and detect command prefix
3.BashCheck login status
4.BashCheck for existing solutions and list current directory
5.BashCreate new solution named PathParamsTest
6.BashInitialize Flow project inside solution folder
7.BashAdd Flow project to solution
8.BashRefresh registry and search for Google Tasks connector
9.BashSearch registry for Google connectors
10.BashSearch registry for Google connectors (raw output)
11.BashFilter Google results for task-related nodes
12.BashFilter for Google Tasks nodes
13.BashSearch registry for tasks nodes
14.BashList unique Google connector packages in registry
15.BashSearch for HTTP node types
16.BashGet HTTP Request node definition
17.BashGet registry definitions for decision, terminate, and script nodes
18.BashRead the scaffolded flow file
19.BashFind flow files in project
20.BashFind flow files and list solution directory
21.Read/Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow-ipe-path_params/00/artifacts/skill-flow-ipe-path_params/PathPara…
22.BashRead flow file
23.BashShow current directory and find flow files
24.Read/Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow-ipe-path_params/00/artifacts/skill-flow-ipe-path_params/PathPara…
25.BashGet end node model and output definition
26.BashGet end node full definition
27.BashSearch for end node types
28.BashGet core.control.end definition
29.Write/Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow-ipe-path_params/00/artifacts/skill-flow-ipe-path_params/PathPara…
30.BashValidate the flow file
31.Edit/Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow-ipe-path_params/00/artifacts/skill-flow-ipe-path_params/PathPara…
32.BashValidate flow without variables section
33.BashTest minimal flow with start and end nodes
34.BashTest original scaffolded flow content
35.BashTest flow with start + end nodes
36.BashTest end node definition without runtimeConstraints
37.BashTest with end node but no edges
38.BashTest edge without sourceHandle field
39.BashUse CLI to add end node and inspect generated format
40.BashCheck node CLI help
41.BashAdd end node via CLI to see generated format
42.Read/Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow-ipe-path_params/00/artifacts/skill-flow-ipe-path_params/PathPara…
43.BashValidate current flow after CLI node add
44.Read/Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow-ipe-path_params/00/artifacts/skill-flow-ipe-path_params/PathPara…
45.Read/Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow-ipe-path_params/00/artifacts/skill-flow-ipe-path_params/PathPara…
46.BashCheck edge CLI commands
47.BashUse CLI to add edge between start and end nodes
48.BashCheck generated edge format in flow file
49.BashValidate test flow with CLI-generated edge
50.BashValidate just the original scaffolded flow backup

Artifacts

task.log

77,170 bytes · click to view

2026-04-22 22:35:31 [DEBUG] coder_eval.criteria: Criteria already discovered, skipping
2026-04-22 22:35:31 [DEBUG] coder_eval.criteria: Validated 16 criterion checkers
2026-04-22 22:35:31 [INFO] coder_eval.orchestrator: API routing: aws_bedrock
2026-04-22 22:35:31 [INFO] coder_eval.orchestrator: Starting iteration 1/1
2026-04-22 22:35:31 [DEBUG] coder_eval.orchestrator: Sending prompt: Create a new Flow project called "PathParamsTest" with a manual trigger.
You need a flow that delete...
2026-04-22 22:35:31 [DEBUG] coder_eval.agents.claude_code_agent: [coder] Starting agent query stream...
2026-04-22 22:35:43 [DEBUG] coder_eval.agents.claude_code_agent: [coder] --- SYSTEM (hook_started): {'type': 'system', 'subtype': 'hook_started', 'hook_id': '0f873e4f-cca3-4c63-b884-ea29477f6d1b', 'hook_name': 'SessionStart:startup', 'hook_event': 'SessionStart', 'uuid': '4a3bbf13-cfaf-481d-a20b-d65
2026-04-22 22:35:43 [DEBUG] coder_eval.agents.claude_code_agent: [coder] --- SYSTEM (hook_started): {'type': 'system', 'subtype': 'hook_started', 'hook_id': '3b1ff3e4-a416-4016-b8c3-be015fdbb2de', 'hook_name': 'SessionStart:startup', 'hook_event': 'SessionStart', 'uuid': '546efac8-2f11-422f-af58-ad6
2026-04-22 22:35:43 [DEBUG] coder_eval.agents.claude_code_agent: [coder] --- SYSTEM (hook_response): {'type': 'system', 'subtype': 'hook_response', 'hook_id': '3b1ff3e4-a416-4016-b8c3-be015fdbb2de', 'hook_name': 'SessionStart:startup', 'hook_event': 'SessionStart', 'output': '', 'stdout': '', 'stderr
2026-04-22 22:35:43 [DEBUG] coder_eval.agents.claude_code_agent: [coder] --- SYSTEM (hook_response): {'type': 'system', 'subtype': 'hook_response', 'hook_id': '0f873e4f-cca3-4c63-b884-ea29477f6d1b', 'hook_name': 'SessionStart:startup', 'hook_event': 'SessionStart', 'output': '@uipath/cli is already i
2026-04-22 22:35:43 [DEBUG] coder_eval.agents.claude_code_agent: [coder] --- SYSTEM (init): {'type': 'system', 'subtype': 'init', 'cwd': '/Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow-ipe-path_params/00/artifacts/skill-flow-ipe-path_params', 'session_id': '7927d13c
2026-04-22 22:35:46 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> TOOL CALL: Skill | id=toolu_bdrk_01ND2ZSYrXeX9gRTDV3EEKEL | params={
  "skill": "uipath:uipath-maestro-flow"
}
2026-04-22 22:35:46 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< TOOL RESULT [OK]: id=toolu_bdrk_01ND2ZSYrXeX9gRTDV3EEKEL | Launching skill: uipath:uipath-maestro-flow
2026-04-22 22:35:50 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> ASSISTANT BLOCK (ThinkingBlock): ThinkingBlock(thinking="Let me start by following the Quick Start steps for creating a new Flow project. I'll need to:\n\n1. Resolve the `uip` binary and detect command prefix\n2. Check login status\n
2026-04-22 22:35:53 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> TOOL CALL: Bash | id=toolu_bdrk_01Mu1DsW7zf2xLUTejFBCY97 | params={
  "command": "UIP=$(command -v uip 2>/dev/null || echo \"$(npm root -g 2>/dev/null | sed 's|/node_modules$||')/bin/uip\")\nCURRENT=$($UIP --version 2>/dev/null | awk '{print $NF}')\necho \"UIP binary: $UIP\"\necho \"Version: $CURRENT\"\nMIN_VERSION=\"0.3.4\"\nif [ \"$(printf '%s\\n%s\\n' \"$MIN_VERSION\" \"$CURRENT\" | sort -V | head -n1)\" = \"$MIN_VERSION\" ]; then\n  FLOW_CMD=\"uip maestro flow\"\nelse\n  FLOW_CMD=\"uip flow\"\nfi\necho \"Using: $FLOW_CMD\"",
  "description": "Resolve uip binary and detect command prefix"
}
2026-04-22 22:35:54 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< TOOL RESULT [OK]: id=toolu_bdrk_01Mu1DsW7zf2xLUTejFBCY97 | UIP binary: /Users/religa/src/coder_eval/.venv/bin/uip
Version: 0.3.4
Using: uip maestro flow
2026-04-22 22:35:58 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> TOOL CALL: Bash | id=toolu_bdrk_01Pi1qKozaiYRhkdm2bANjxK | params={
  "command": "uip login status --output json 2>/dev/null",
  "description": "Check login status"
}
2026-04-22 22:35:59 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< TOOL RESULT [OK]: id=toolu_bdrk_01Pi1qKozaiYRhkdm2bANjxK | {
  "Result": "Success",
  "Code": "LogIn",
  "Data": {
    "Status": "Logged in",
    "Organization": "popoc",
    "Tenant": "flow_eval",
    "Expiration Date": "2026-04-23T06:34:47.000Z"
  }
}
2026-04-22 22:36:01 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> ASSISTANT BLOCK (ThinkingBlock): ThinkingBlock(thinking="Good, I'm logged in. Now let me check the current directory for existing `.uipx` files and create a new solution and flow project.", signature='Eq0CCkgIDRABGAIqQKDlRTI6P25Q2nJS
2026-04-22 22:36:02 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> TOOL CALL: Bash | id=toolu_bdrk_01V9uxhmhsYSbXDpE9u2v1cV | params={
  "command": "ls *.uipx 2>/dev/null || echo \"No .uipx files found\"\nls -la",
  "description": "Check for existing solutions and list current directory"
}
2026-04-22 22:36:02 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< TOOL RESULT [OK]: id=toolu_bdrk_01V9uxhmhsYSbXDpE9u2v1cV | (eval):1: no matches found: *.uipx
No .uipx files found
total 0
drwxr-xr-x  3 religa  staff   96 Apr 22 22:35 .
drwxr-xr-x  3 religa  staff   96 Apr 22 22:35 ..
drwxr-xr-x  7 religa  staff  224 Apr 22 22:35 .venv
2026-04-22 22:36:04 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> ASSISTANT BLOCK (ThinkingBlock): ThinkingBlock(thinking='No existing solutions. I\'ll create a new one. I\'ll use "PathParamsTest" for both the solution and project name.', signature='EpkCCkgIDRABGAIqQCSIlkA113aSbs9+B+sPGdYhBs5lGLuCD
2026-04-22 22:36:04 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> TOOL CALL: Bash | id=toolu_bdrk_01QgLqt8mtBpdpGUWvxnne6d | params={
  "command": "uip solution new \"PathParamsTest\" --output json 2>/dev/null",
  "description": "Create new solution named PathParamsTest"
}
2026-04-22 22:36:06 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< TOOL RESULT [OK]: id=toolu_bdrk_01QgLqt8mtBpdpGUWvxnne6d | {
  "Result": "Success",
  "Code": "SolutionNew",
  "Data": {
    "Status": "Created successfully",
    "Path": "/Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow-ipe-path_params/00/artifacts/skill-flow-ipe-path_params/PathParamsTest/PathParamsTest.uipx"
  }
}
2026-04-22 22:36:08 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> TOOL CALL: Bash | id=toolu_bdrk_011NMDdU5PatkBBuWAa6Y642 | params={
  "command": "cd PathParamsTest && uip maestro flow init PathParamsTest --output json 2>/dev/null",
  "description": "Initialize Flow project inside solution folder"
}
2026-04-22 22:36:09 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< TOOL RESULT [OK]: id=toolu_bdrk_011NMDdU5PatkBBuWAa6Y642 | {
  "Result": "Success",
  "Code": "FlowInit",
  "Data": {
    "Status": "Created successfully",
    "Path": "/Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow-ipe-path_params/00/artifacts/skill-flow-ipe-path_params/PathParamsTest/PathParamsTest"
  }
}
2026-04-22 22:36:12 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> TOOL CALL: Bash | id=toolu_bdrk_017rvy4XZUsCZGGyN8baQ4Yd | params={
  "command": "uip solution project add \\\n  /Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow-ipe-path_params/00/artifacts/skill-flow-ipe-path_params/PathParamsTest/PathParamsTest \\\n  /Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow-ipe-path_params/00/artifacts/skill-flow-ipe-path_params/PathParamsTest/PathParamsTest.uipx \\\n  --output json 2>/dev/null",
  "description": "Add Flow project to solution"
}
2026-04-22 22:36:18 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< TOOL RESULT [OK]: id=toolu_bdrk_017rvy4XZUsCZGGyN8baQ4Yd | {
  "Result": "Success",
  "Code": "ProjectAdd",
  "Data": {
    "Status": "Added successfully",
    "Project": "PathParamsTest/project.uiproj",
    "Solution": "/Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow-ipe-path_params/00/artifacts/skill-flow-ipe-path_params/PathParamsTest/PathParamsTest.uipx"
  }
}
2026-04-22 22:36:21 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> TOOL CALL: Bash | id=toolu_bdrk_015ExqvdC3j6cTYgvjns4AeH | params={
  "command": "uip maestro flow registry pull --output json 2>/dev/null | head -5\n# Also search for Google Tasks connector\nuip maestro flow registry search \"google tasks\" --output json 2>/dev/null",
  "description": "Refresh registry and search for Google Tasks connector"
}
2026-04-22 22:36:24 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< TOOL RESULT [OK]: id=toolu_bdrk_015ExqvdC3j6cTYgvjns4AeH | {
  "Result": "Success",
  "Code": "NodePullSuccess",
  "Data": {
    "NodesCount": 4124,
{
  "Result": "Success",
  "Code": "NodeSearchSuccess",
  "Data": []
}
2026-04-22 22:36:27 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> TOOL CALL: Bash | id=toolu_bdrk_01CZEEer3duN4ixZp1jWf9Un | params={
  "command": "uip maestro flow registry search \"google\" --output json 2>/dev/null | python3 -c \"import json,sys; data=json.load(sys.stdin); [print(n.get('type',''), n.get('name','')) for n in data.get('Data',[])]\" | head -30",
  "description": "Search registry for Google connectors"
}
2026-04-22 22:36:28 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< TOOL RESULT [OK]: id=toolu_bdrk_01CZEEer3duN4ixZp1jWf9Un | (Bash completed with no output)
2026-04-22 22:36:31 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> TOOL CALL: Bash | id=toolu_bdrk_01PREZzWb34u26juKdiprCCM | params={
  "command": "uip maestro flow registry search \"google\" --output json 2>/dev/null",
  "description": "Search registry for Google connectors (raw output)"
}
2026-04-22 22:36:32 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< TOOL RESULT [OK]: id=toolu_bdrk_01PREZzWb34u26juKdiprCCM | <persisted-output>
Output too large (139.2KB). Full output saved to: /Users/religa/.claude/projects/-Users-religa-src-coder-eval-runs-2026-04-22-20-39-58-default-skill-flow-ipe-path-params-00-artifacts-skill-flow-ipe-path-params/7927d13c-8738-4ee3-9466-ac45d0e8fd2f/tool-results/bixabz0mh.txt

Preview (first 2KB):
{
  "Result": "Success",
  "Code": "NodeSearchSuccess",
  "Data": [
    {
      "NodeType": "uipath.connector.uipath-google-gmailcustom.apply-gmail-labels",
      "Category": "connector.196604",
      "DisplayName": "Apply Gmail Labels",
      "Description": "(Custom Gmail) Apply labels to a mail in Gmail",
      "Version": "1.0.0",
      "Tags": "connector, activity"
    },
    {
      "NodeType": "uipath.agent.resource.tool.connector.uipath-google-gmailcustom.apply-gmail-labels"…(1479 more chars)
2026-04-22 22:36:36 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> TOOL CALL: Bash | id=toolu_bdrk_017FT4tAiSPKe5zvtNk8R25s | params={
  "command": "cat /Users/religa/.claude/projects/-Users-religa-src-coder-eval-runs-2026-04-22-20-39-58-default-skill-flow-ipe-path-params-00-artifacts-skill-flow-ipe-path-params/7927d13c-8738-4ee3-9466-ac45d0e8fd2f/tool-results/bixabz0mh.txt | python3 -c \"import json,sys; data=json.load(sys.stdin); [print(n.get('NodeType',''), '|', n.get('DisplayName','')) for n in data.get('Data',[]) if 'task' in n.get('NodeType','').lower() or 'task' in n.get('DisplayName','').lower()]\"",
  "description": "Filter Google results for task-related nodes"
}
2026-04-22 22:36:36 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< TOOL RESULT [OK]: id=toolu_bdrk_017FT4tAiSPKe5zvtNk8R25s | (Bash completed with no output)
2026-04-22 22:36:40 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> TOOL CALL: Bash | id=toolu_bdrk_01DKzZTSBcSuKqdtXGb753nX | params={
  "command": "cat /Users/religa/.claude/projects/-Users-religa-src-coder-eval-runs-2026-04-22-20-39-58-default-skill-flow-ipe-path-params-00-artifacts-skill-flow-ipe-path-params/7927d13c-8738-4ee3-9466-ac45d0e8fd2f/tool-results/bixabz0mh.txt | python3 -c \"\nimport json,sys\ndata=json.load(sys.stdin)\nnodes = data.get('Data',[])\nprint(f'Total Google nodes: {len(nodes)}')\n# Search for task-related\ntask_nodes = [n for n in nodes if 'task' in n.get('NodeType','').lower() or 'task' in n.get('DisplayName','').lower()]\nprint(f'Task-related: {len(task_nodes)}')\nfor n in task_nodes[:20]:\n    print(n.get('NodeType',''), '|', n.get('DisplayName',''))\n\"",
  "description": "Filter for Google Tasks nodes"
}
2026-04-22 22:36:41 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< TOOL RESULT [OK]: id=toolu_bdrk_01DKzZTSBcSuKqdtXGb753nX | Total Google nodes: 409
Task-related: 0
2026-04-22 22:36:43 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> TOOL CALL: Bash | id=toolu_bdrk_01RR8sZH3UniMp19ivVaWVXm | params={
  "command": "# Search specifically for tasks connector\nuip maestro flow registry search \"tasks\" --output json 2>/dev/null | python3 -c \"\nimport json,sys\ndata=json.load(sys.stdin)\nnodes = data.get('Data',[])\nprint(f'Total nodes: {len(nodes)}')\nfor n in nodes[:30]:\n    print(n.get('NodeType',''), '|', n.get('DisplayName',''))\n\"",
  "description": "Search registry for tasks nodes"
}
2026-04-22 22:36:45 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< TOOL RESULT [OK]: id=toolu_bdrk_01RR8sZH3UniMp19ivVaWVXm | Total nodes: 9
uipath.agent.autonomous | Autonomous Agent
uipath.connector.uipath-asana-asana.search-tasks | Search Tasks
uipath.agent.resource.tool.connector.uipath-asana-asana.search-tasks | Search Tasks
uipath.connector.uipath-servicenow-servicenow.list-incident-tasks | List Incident Tasks
uipath.agent.resource.tool.connector.uipath-servicenow-servicenow.list-incident-tasks | List Incident Tasks
uipath.connector.uipath-doist-todoist.search-tasks | Search Tasks
uipath.agent.resource.tool.connector.uipath-doist-todoist.search-tasks | Search Tasks
uipath.connector.uipath-workday-workdayrest.list-all-tasks-in-your-inbox | List All Tasks in Your Inbox
uipath.agent.resource.tool.connector.uipath-workday-workdayrest.list-all-tasks-in-your-inbox | List All Tasks in Your Inbox
2026-04-22 22:36:50 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> TOOL CALL: Bash | id=toolu_bdrk_01YQnYGccB3tRCxNLVMy4d2U | params={
  "command": "# No Google Tasks connector found. Let's search specifically for \"delete\" operations in the Google Gmail connector\ncat /Users/religa/.claude/projects/-Users-religa-src-coder-eval-runs-2026-04-22-20-39-58-default-skill-flow-ipe-path-params-00-artifacts-skill-flow-ipe-path-params/7927d13c-8738-4ee3-9466-ac45d0e8fd2f/tool-results/bixabz0mh.txt | python3 -c \"\nimport json,sys\ndata=json.load(sys.stdin)\nnodes = data.get('Data',[])\n# Show all unique connectors in google results\nconnectors = set()\nfor n in nodes:\n    nt = n.get('NodeType','')\n    parts = nt.split('.')\n    if len(parts) >= 3:\n        connectors.add(parts[2] if parts[1] == 'connector' else '.'.join(parts[:4]))\nprint('Unique Google connector packages:')\nfor c in sorted(connectors):\n    print(' ', c)\n\…(74 more chars)
2026-04-22 22:36:50 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< TOOL RESULT [OK]: id=toolu_bdrk_01YQnYGccB3tRCxNLVMy4d2U | Unique Google connector packages:
  trigger
  uipath-google-cloudplatform
  uipath-google-docs
  uipath-google-drive
  uipath-google-drivecustom
  uipath-google-gmail
  uipath-google-gmailcustom
  uipath-google-maps
  uipath-google-sheets
  uipath-google-sheetscustom
  uipath-google-speechtotext
  uipath-google-texttospeech
  uipath-google-vertex
  uipath-google-vision
  uipath-google-youtube
  uipath.agent.resource.tool
2026-04-22 22:36:56 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> ASSISTANT BLOCK (ThinkingBlock): ThinkingBlock(thinking='There\'s no Google Tasks connector in the registry. The task asks me to create a flow that deletes a task from a Google Tasks list. Since there is no Google Tasks connector ava
2026-04-22 22:36:57 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> TOOL CALL: Bash | id=toolu_bdrk_01WygmoXETFD2BBEqELrsBhP | params={
  "command": "uip maestro flow registry search \"http\" --output json 2>/dev/null | python3 -c \"\nimport json,sys\ndata=json.load(sys.stdin)\nnodes = data.get('Data',[])\nfor n in nodes:\n    print(n.get('NodeType',''), '|', n.get('DisplayName',''))\n\"",
  "description": "Search for HTTP node types"
}
2026-04-22 22:36:59 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< TOOL RESULT [OK]: id=toolu_bdrk_01WygmoXETFD2BBEqELrsBhP | core.action.http | HTTP Request
core.action.http.v2 | Managed HTTP Request
uipath.connector.uipath-activecampaign-activecampaign.activecampaign-http-request | ActiveCampaign HTTP Request
uipath.agent.resource.tool.connector.uipath-activecampaign-activecampaign.activecampaign-http-request | ActiveCampaign HTTP Request
uipath.connector.uipath-adobe-sign.http-request | HTTP Request
uipath.agent.resource.tool.connector.uipath-adobe-sign.http-request | HTTP Request
uipath.connector.uipath-adobe-pdfservices.http-request | HTTP Request
uipath.agent.resource.tool.connector.uipath-adobe-pdfservices.http-request | HTTP Request
uipath.connector.uipath-amazon-connect.amazon-connect-http-request | Amazon Connect HTTP Request
uipath.agent.resource.tool.connector.uipath-amazon-connect.amazon-connect-http…(22965 more chars)
2026-04-22 22:37:04 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> ASSISTANT BLOCK (ThinkingBlock): ThinkingBlock(thinking="There's no dedicated Google Tasks connector in the registry, so I'll use `core.action.http` to make the Google Tasks API call. The Google Tasks API delete endpoint is:\n`DELETE
2026-04-22 22:37:04 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> ASSISTANT: Now let me get the registry definitions for all the node types I need:
2026-04-22 22:37:05 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> TOOL CALL: Bash | id=toolu_bdrk_01GvuSDjSftkpG4JLCFLJQaC | params={
  "command": "uip maestro flow registry get \"core.action.http\" --output json 2>/dev/null",
  "description": "Get HTTP Request node definition"
}
2026-04-22 22:37:07 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< TOOL RESULT [OK]: id=toolu_bdrk_01GvuSDjSftkpG4JLCFLJQaC | {
  "Result": "Success",
  "Code": "NodeGetSuccess",
  "Data": {
    "Node": {
      "nodeType": "core.action.http",
      "version": "1.0.0",
      "category": "data-operations",
      "description": "Make API calls with branching and retry",
      "tags": [
        "connector",
        "http",
        "api",
        "rest",
        "request"
      ],
      "sortOrder": 35,
      "supportsErrorHandling": true,
      "display": {
        "label": "HTTP Request",
        "icon": "app-window",
        "iconBackground": "linear-gradient(225deg, #FAFAFB 0%, #ECEDEF 100%)",
        "iconBackgroundDark": "linear-gradient(225deg, #526069 0%, rgba(50, 60, 66, 0.6) 100%)"
      },
      "handleConfiguration": [
        {
          "position": "left",
          "handles": [
            {
           …(25005 more chars)
2026-04-22 22:37:11 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> TOOL CALL: Bash | id=toolu_bdrk_01D1khLmHEn7FnPoVfaEJdsu | params={
  "command": "uip maestro flow registry get \"core.logic.decision\" --output json 2>/dev/null\nuip maestro flow registry get \"core.logic.terminate\" --output json 2>/dev/null\nuip maestro flow registry get \"core.action.script\" --output json 2>/dev/null",
  "description": "Get registry definitions for decision, terminate, and script nodes"
}
2026-04-22 22:37:16 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< TOOL RESULT [OK]: id=toolu_bdrk_01D1khLmHEn7FnPoVfaEJdsu | {
  "Result": "Success",
  "Code": "NodeGetSuccess",
  "Data": {
    "Node": {
      "nodeType": "core.logic.decision",
      "version": "1.0.0",
      "category": "control-flow",
      "description": "Branch based on a true/false condition",
      "tags": [
        "control-flow",
        "if",
        "loop",
        "switch"
      ],
      "sortOrder": 20,
      "display": {
        "label": "Decision",
        "icon": "trending-up-down",
        "iconBackground": "linear-gradient(225deg, #FAFAFB 0%, #ECEDEF 100%)",
        "iconBackgroundDark": "linear-gradient(225deg, #526069 0%, rgba(50, 60, 66, 0.6) 100%)"
      },
      "handleConfiguration": [
        {
          "position": "left",
          "handles": [
            {
              "id": "input",
              "type": "target",
 …(3116 more chars)
2026-04-22 22:37:18 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> ASSISTANT BLOCK (ThinkingBlock): ThinkingBlock(thinking='Now let me also get the end node definition.', signature='EtYBCkgIDRABGAIqQDWv+K6AuRh22iOp48yZrEe3CSoBrLfC781VXf+QjPdjSLFovmyMaA4c4wo16fvsqH9lUWHezcRgQ2Dzvsd08GMSDJov5PYIXh39PJ
2026-04-22 22:37:18 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> ASSISTANT: Now let me read the scaffolded flow file and then build the complete flow:
2026-04-22 22:37:19 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> TOOL CALL: Bash | id=toolu_bdrk_01SpQcoCfF8t64aTZtbLmuVA | params={
  "command": "cat PathParamsTest/PathParamsTest/PathParamsTest.flow 2>/dev/null || cat PathParamsTest/PathParamsTest/*.flow 2>/dev/null",
  "description": "Read the scaffolded flow file"
}
2026-04-22 22:37:19 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< TOOL RESULT [ERROR]: id=toolu_bdrk_01SpQcoCfF8t64aTZtbLmuVA | Exit code 1
(eval):1: no matches found: PathParamsTest/PathParamsTest/*.flow
2026-04-22 22:37:22 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> TOOL CALL: Bash | id=toolu_bdrk_0111yztp11WHr2M7jtQ8kqqS | params={
  "command": "find PathParamsTest -name \"*.flow\" 2>/dev/null\nls -la PathParamsTest/PathParamsTest/ 2>/dev/null",
  "description": "Find flow files in project"
}
2026-04-22 22:37:22 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< TOOL RESULT [ERROR]: id=toolu_bdrk_0111yztp11WHr2M7jtQ8kqqS | Exit code 1
PathParamsTest/PathParamsTest.flow
2026-04-22 22:37:24 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> TOOL CALL: Bash | id=toolu_bdrk_01YatajFuUjs7hfBELi2uhsQ | params={
  "command": "find . -name \"*.flow\" 2>/dev/null\nls -la PathParamsTest/ 2>/dev/null",
  "description": "Find flow files and list solution directory"
}
2026-04-22 22:37:24 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< TOOL RESULT [OK]: id=toolu_bdrk_01YatajFuUjs7hfBELi2uhsQ | ./PathParamsTest/PathParamsTest.flow
total 16
drwxr-xr-x  4 religa  staff   128 Apr 22 22:36 .
drwxr-xr-x  5 religa  staff   160 Apr 22 22:36 ..
-rw-r--r--  1 religa  staff  2537 Apr 22 22:36 PathParamsTest.flow
-rw-r--r--  1 religa  staff    56 Apr 22 22:36 project.uiproj
2026-04-22 22:37:27 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> TOOL CALL: Read | id=toolu_bdrk_01YJvLCixQvxRowddLa75xMQ | params={
  "file_path": "/Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow-ipe-path_params/00/artifacts/skill-flow-ipe-path_params/PathParamsTest/PathParamsTest.flow"
}
2026-04-22 22:37:27 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< TOOL RESULT [ERROR]: id=toolu_bdrk_01YJvLCixQvxRowddLa75xMQ | File does not exist. Note: your current working directory is /Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow-ipe-path_params/00/artifacts/skill-flow-ipe-path_params/PathParamsTest. Did you mean PathParamsTest.uipx?
2026-04-22 22:37:30 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> TOOL CALL: Bash | id=toolu_bdrk_01JwvKnLL2hz3koy5tGd2TSg | params={
  "command": "cat /Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow-ipe-path_params/00/artifacts/skill-flow-ipe-path_params/PathParamsTest/PathParamsTest.flow",
  "description": "Read flow file"
}
2026-04-22 22:37:30 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< TOOL RESULT [ERROR]: id=toolu_bdrk_01JwvKnLL2hz3koy5tGd2TSg | Exit code 1
cat: /Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow-ipe-path_params/00/artifacts/skill-flow-ipe-path_params/PathParamsTest/PathParamsTest.flow: No such file or directory
2026-04-22 22:37:32 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> TOOL CALL: Bash | id=toolu_bdrk_01XwjJS8ZzdKz47ALUeoUJa3 | params={
  "command": "pwd && find . -name \"*.flow\" 2>/dev/null",
  "description": "Show current directory and find flow files"
}
2026-04-22 22:37:32 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< TOOL RESULT [OK]: id=toolu_bdrk_01XwjJS8ZzdKz47ALUeoUJa3 | /Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow-ipe-path_params/00/artifacts/skill-flow-ipe-path_params/PathParamsTest
./PathParamsTest/PathParamsTest.flow
2026-04-22 22:37:35 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> TOOL CALL: Read | id=toolu_bdrk_01MHVpdewrbkozkLHfXF8GuA | params={
  "file_path": "/Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow-ipe-path_params/00/artifacts/skill-flow-ipe-path_params/PathParamsTest/PathParamsTest/PathParamsTest.flow"
}
2026-04-22 22:37:35 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< TOOL RESULT [OK]: id=toolu_bdrk_01MHVpdewrbkozkLHfXF8GuA |      1→{
     2→  "id": "00ee8558-d4ca-4464-816e-5ee157e17511",
     3→  "version": "1.0.0",
     4→  "name": "PathParamsTest",
     5→  "nodes": [
     6→    {
     7→      "id": "start",
     8→      "type": "core.trigger.manual",
     9→      "typeVersion": "1.0.0",
    10→      "display": {
    11→        "label": "Manual trigger"
    12→      },
    13→      "inputs": {},
    14→      "outputs": {
    15→        "output": {
    16→          "type": "object",
    17→          "description": "Data passed when manually triggering the workflow.",
    18→          "source": "null",
    19→          "var": "output"
    20→        }
    21→      },
    22→      "model": {
    23→        "type": "bpmn:StartEvent",
    24→        "entryPointId": "b88fbbc7-7281-46af-8358-878db67dc20d",
    25→ …(2847 more chars)
2026-04-22 22:37:52 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> ASSISTANT BLOCK (ThinkingBlock): ThinkingBlock(thinking='Now I have the scaffolded flow file. I need to build the full flow with:\n\n1. `start` - Manual trigger (already exists)\n2. `deleteTask` - HTTP Request node (`core.action.http
2026-04-22 22:37:53 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> TOOL CALL: Bash | id=toolu_bdrk_012aN4zVR2MZV8JYCtMwxpfs | params={
  "command": "uip maestro flow registry get \"core.logic.end\" --output json 2>/dev/null | python3 -c \"import json,sys; d=json.load(sys.stdin); print(json.dumps(d['Data']['Node'].get('model'), indent=2)); print('---outputDef---'); print(json.dumps(d['Data']['Node'].get('outputDefinition'), indent=2))\"",
  "description": "Get end node model and output definition"
}
2026-04-22 22:37:55 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< TOOL RESULT [ERROR]: id=toolu_bdrk_012aN4zVR2MZV8JYCtMwxpfs | Exit code 1
Traceback (most recent call last):
  File "<string>", line 1, in <module>
    import json,sys; d=json.load(sys.stdin); print(json.dumps(d['Data']['Node'].get('model'), indent=2)); print('---outputDef---'); print(json.dumps(d['Data']['Node'].get('outputDefinition'), indent=2))
                                                              ~^^^^^^^^
KeyError: 'Data'
2026-04-22 22:37:57 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> TOOL CALL: Bash | id=toolu_bdrk_01LE6rGEyQFAtA8w5scf1jCA | params={
  "command": "uip maestro flow registry get \"core.logic.end\" --output json 2>/dev/null",
  "description": "Get end node full definition"
}
2026-04-22 22:37:59 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< TOOL RESULT [ERROR]: id=toolu_bdrk_01LE6rGEyQFAtA8w5scf1jCA | Exit code 1
{
  "Result": "Failure",
  "Message": "Node not found",
  "Instructions": "No node found with node type: core.logic.end"
}
2026-04-22 22:38:02 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> TOOL CALL: Bash | id=toolu_bdrk_01M19Pmq1xXNgCB5XSo1RQGE | params={
  "command": "uip maestro flow registry search \"end\" --output json 2>/dev/null | python3 -c \"\nimport json,sys\ndata=json.load(sys.stdin)\nfor n in data.get('Data',[]):\n    print(n.get('NodeType',''), '|', n.get('DisplayName',''))\n\"",
  "description": "Search for end node types"
}
2026-04-22 22:38:04 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< TOOL RESULT [OK]: id=toolu_bdrk_01M19Pmq1xXNgCB5XSo1RQGE | core.control.end | End
core.logic.terminate | Terminate
uipath.connector.uipath-amazon-ses.send-email | Send Email
uipath.agent.resource.tool.connector.uipath-amazon-ses.send-email | Send Email
uipath.connector.uipath-aweber-aweber.schedule-broadcast | Schedule Broadcast
uipath.agent.resource.tool.connector.uipath-aweber-aweber.schedule-broadcast | Schedule Broadcast
uipath.connector.uipath-microsoft-azuredefenderforcloud.get-latest-storage-scan-results | Get Latest Storage Scan Results
uipath.agent.resource.tool.connector.uipath-microsoft-azuredefenderforcloud.get-latest-storage-scan-results | Get Latest Storage Scan Results
uipath.connector.uipath-microsoft-azuredefenderforcloud.request-storage-scan | Request Storage Scan
uipath.agent.resource.tool.connector.uipath-microsoft-azuredefende…(27007 more chars)
2026-04-22 22:38:07 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> ASSISTANT BLOCK (ThinkingBlock): ThinkingBlock(thinking='The end node type is `core.control.end`. Let me get its definition.', signature='Eu0BCkgIDRABGAIqQO1jShgQOslmqder9VEafeP/HLXri0M3GrAxgcC25usTv/nZAfzVwFwz2j4zyMIBEAmjZgGEUOLk7bW
2026-04-22 22:38:08 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> TOOL CALL: Bash | id=toolu_bdrk_01HTyQHAYCHGAoymFUkDpFf1 | params={
  "command": "uip maestro flow registry get \"core.control.end\" --output json 2>/dev/null",
  "description": "Get core.control.end definition"
}
2026-04-22 22:38:09 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< TOOL RESULT [OK]: id=toolu_bdrk_01HTyQHAYCHGAoymFUkDpFf1 | {
  "Result": "Success",
  "Code": "NodeGetSuccess",
  "Data": {
    "Node": {
      "nodeType": "core.control.end",
      "version": "1.0.0",
      "category": "control-flow",
      "description": "Mark the end of a workflow path",
      "tags": [
        "control-flow",
        "end",
        "finish",
        "complete"
      ],
      "sortOrder": 20,
      "display": {
        "label": "End",
        "icon": "circle-check",
        "shape": "circle"
      },
      "handleConfiguration": [
        {
          "position": "left",
          "handles": [
            {
              "id": "input",
              "type": "target",
              "handleType": "input"
            }
          ]
        }
      ],
      "model": {
        "type": "bpmn:EndEvent"
      },
      "runtimeConstraints…(80 more chars)
2026-04-22 22:38:47 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> ASSISTANT BLOCK (ThinkingBlock): ThinkingBlock(thinking="Now I have all the definitions I need. Let me build the complete flow file.\n\nThe flow topology will be:\n1. `start` (core.trigger.manual) → `deleteTask` (core.action.http)\n2
2026-04-22 22:38:47 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> ASSISTANT: Now I have everything I need. Let me build the complete flow JSON:
2026-04-22 22:40:09 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> TOOL CALL: Write | id=toolu_bdrk_01LhjVPWf4pN6fpjtTy8MQhH | params={
  "file_path": "/Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow-ipe-path_params/00/artifacts/skill-flow-ipe-path_params/PathParamsTest/PathParamsTest/PathParamsTest.flow",
  "content": "{\n  \"id\": \"00ee8558-d4ca-4464-816e-5ee157e17511\",\n  \"version\": \"1.0.0\",\n  \"name\": \"PathParamsTest\",\n  \"nodes\": [\n    {\n      \"id\": \"start\",\n      \"type\": \"core.trigger.manual\",\n      \"typeVersion\": \"1.0.0\",\n      \"display\": {\n        \"label\": \"Manual trigger\"\n      },\n      \"inputs\": {},\n      \"outputs\": {\n        \"output\": {\n          \"type\": \"object\",\n          \"description\": \"Data passed when manually triggering the workflow.\",\n          \"source\": \"null\",\n          \"var\": \"output\"\n        }\n      },\n    …(32733 more chars)
2026-04-22 22:40:09 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< TOOL RESULT [OK]: id=toolu_bdrk_01LhjVPWf4pN6fpjtTy8MQhH | The file /Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow-ipe-path_params/00/artifacts/skill-flow-ipe-path_params/PathParamsTest/PathParamsTest/PathParamsTest.flow has been updated successfully.
2026-04-22 22:40:13 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> TOOL CALL: Bash | id=toolu_bdrk_01HRyX7E2bBHMKe5aG6CCZkU | params={
  "command": "cd /Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow-ipe-path_params/00/artifacts/skill-flow-ipe-path_params/PathParamsTest/PathParamsTest && uip maestro flow validate PathParamsTest.flow --output json 2>/dev/null",
  "description": "Validate the flow file"
}
2026-04-22 22:40:14 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< TOOL RESULT [ERROR]: id=toolu_bdrk_01HRyX7E2bBHMKe5aG6CCZkU | Exit code 1
{
  "Result": "Failure",
  "Message": "Validation failed for /Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow-ipe-path_params/00/artifacts/skill-flow-ipe-path_params/PathParamsTest/PathParamsTest/PathParamsTest.flow",
  "Instructions": "Found 1 error(s):\n  - [error] [(root)] Schema validation failed: Invalid input: expected string, received undefined"
}
2026-04-22 22:40:33 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> ASSISTANT BLOCK (ThinkingBlock): ThinkingBlock(thinking='There\'s a schema validation error. The issue might be with the variables structure or something else. Let me look at the error more carefully: "Invalid input: expected string,
2026-04-22 22:40:33 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> ASSISTANT: Let me fix the validation error. I'll check with a simplified test first:
2026-04-22 22:40:34 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> TOOL CALL: Edit | id=toolu_bdrk_011qN5TFmKg3X6vLZjWCPjda | params={
  "replace_all": false,
  "file_path": "/Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow-ipe-path_params/00/artifacts/skill-flow-ipe-path_params/PathParamsTest/PathParamsTest/PathParamsTest.flow",
  "old_string": "  \"variables\": {\n    \"globals\": [\n      {\n        \"id\": \"taskListId\",\n        \"name\": \"taskListId\",\n        \"type\": \"string\",\n        \"variableType\": \"in\",\n        \"default\": \"MDExNDI0NjM0Mzk5NjM4MzA2MzU6MDow\"\n      },\n      {\n        \"id\": \"taskId\",\n        \"name\": \"taskId\",\n        \"type\": \"string\",\n        \"variableType\": \"in\",\n        \"default\": \"dGFza19pZF9leGFtcGxl\"\n      }\n    ]\n  },",
  "new_string": "  \"variables\": {},"
}
2026-04-22 22:40:34 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< TOOL RESULT [OK]: id=toolu_bdrk_011qN5TFmKg3X6vLZjWCPjda | The file /Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow-ipe-path_params/00/artifacts/skill-flow-ipe-path_params/PathParamsTest/PathParamsTest/PathParamsTest.flow has been updated successfully.
2026-04-22 22:40:37 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> TOOL CALL: Bash | id=toolu_bdrk_01TisnDvES8cMDsYZwBDx1ZE | params={
  "command": "cd /Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow-ipe-path_params/00/artifacts/skill-flow-ipe-path_params/PathParamsTest/PathParamsTest && uip maestro flow validate PathParamsTest.flow --output json 2>/dev/null",
  "description": "Validate flow without variables section"
}
2026-04-22 22:40:39 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< TOOL RESULT [ERROR]: id=toolu_bdrk_01TisnDvES8cMDsYZwBDx1ZE | Exit code 1
{
  "Result": "Failure",
  "Message": "Validation failed for /Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow-ipe-path_params/00/artifacts/skill-flow-ipe-path_params/PathParamsTest/PathParamsTest/PathParamsTest.flow",
  "Instructions": "Found 1 error(s):\n  - [error] [(root)] Schema validation failed: Invalid input: expected string, received undefined"
}
2026-04-22 22:41:36 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> ASSISTANT BLOCK (ThinkingBlock): ThinkingBlock(thinking='The error is not in the variables. Let me try to isolate the issue by checking each node. Let me try with just the start node and no other nodes first.\n\nActually, the error "
2026-04-22 22:41:36 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> ASSISTANT: Let me test the scaffolded flow first, then isolate the issue:
2026-04-22 22:41:45 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> TOOL CALL: Bash | id=toolu_bdrk_01FzKrTTWETF4dYWjDH43aTK | params={
  "command": "cd /Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow-ipe-path_params/00/artifacts/skill-flow-ipe-path_params/PathParamsTest/PathParamsTest && cat > /tmp/minimal_test.flow << 'EOF'\n{\n  \"id\": \"00ee8558-d4ca-4464-816e-5ee157e17511\",\n  \"version\": \"1.0.0\",\n  \"name\": \"PathParamsTest\",\n  \"nodes\": [\n    {\n      \"id\": \"start\",\n      \"type\": \"core.trigger.manual\",\n      \"typeVersion\": \"1.0.0\",\n      \"display\": {\"label\": \"Manual trigger\"},\n      \"inputs\": {},\n      \"outputs\": {\n        \"output\": {\"type\": \"object\", \"description\": \"Data passed when manually triggering the workflow.\", \"source\": \"null\", \"var\": \"output\"}\n      },\n      \"model\": {\"type\": \"bpmn:StartEvent\", \"entryPointId\": \"b…(2326 more chars)
2026-04-22 22:41:47 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< TOOL RESULT [ERROR]: id=toolu_bdrk_01FzKrTTWETF4dYWjDH43aTK | Exit code 1
{
  "Result": "Failure",
  "Message": "Validation failed for /tmp/minimal_test.flow",
  "Instructions": "Found 1 error(s):\n  - [error] [(root)] Schema validation failed: Invalid input: expected string, received undefined"
}
2026-04-22 22:41:49 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> ASSISTANT BLOCK (ThinkingBlock): ThinkingBlock(thinking="There's something about the minimal flow that is causing the schema validation to fail. Let me try with just the scaffolded flow to see if that passes:", signature='EsICCkgIDRA
2026-04-22 22:41:57 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> TOOL CALL: Bash | id=toolu_bdrk_018RH8F4HJafiXsQmU9gy5iv | params={
  "command": "# Test with the original scaffolded flow content\ncat > /tmp/scaffold_test.flow << 'EOF'\n{\n  \"id\": \"00ee8558-d4ca-4464-816e-5ee157e17511\",\n  \"version\": \"1.0.0\",\n  \"name\": \"PathParamsTest\",\n  \"nodes\": [\n    {\n      \"id\": \"start\",\n      \"type\": \"core.trigger.manual\",\n      \"typeVersion\": \"1.0.0\",\n      \"display\": {\n        \"label\": \"Manual trigger\"\n      },\n      \"inputs\": {},\n      \"outputs\": {\n        \"output\": {\n          \"type\": \"object\",\n          \"description\": \"Data passed when manually triggering the workflow.\",\n          \"source\": \"null\",\n          \"var\": \"output\"\n        }\n      },\n      \"model\": {\n        \"type\": \"bpmn:StartEvent\",\n        \"entryPointId\": \"b88fbbc7-7281-46af-8358…(2309 more chars)
2026-04-22 22:41:58 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< TOOL RESULT [OK]: id=toolu_bdrk_018RH8F4HJafiXsQmU9gy5iv | {
  "Result": "Success",
  "Code": "FlowValidate",
  "Data": {
    "File": "/tmp/scaffold_test.flow",
    "Status": "Valid"
  }
}
2026-04-22 22:42:01 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> ASSISTANT BLOCK (ThinkingBlock): ThinkingBlock(thinking="The original scaffolded flow is valid. Now let me try to add a second node to see what happens. Let me add the `core.control.end` node to the scaffolded flow and see if it's th
2026-04-22 22:42:07 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> TOOL CALL: Bash | id=toolu_bdrk_014qtvz3z53DywX2THHwWeb4 | params={
  "command": "# Add end node to scaffolded flow\ncat > /tmp/scaffold_plus_end.flow << 'EOF'\n{\n  \"id\": \"00ee8558-d4ca-4464-816e-5ee157e17511\",\n  \"version\": \"1.0.0\",\n  \"name\": \"PathParamsTest\",\n  \"nodes\": [\n    {\n      \"id\": \"start\",\n      \"type\": \"core.trigger.manual\",\n      \"typeVersion\": \"1.0.0\",\n      \"display\": {\"label\": \"Manual trigger\"},\n      \"inputs\": {},\n      \"outputs\": {\n        \"output\": {\"type\": \"object\", \"description\": \"Data passed when manually triggering the workflow.\", \"source\": \"null\", \"var\": \"output\"}\n      },\n      \"model\": {\"type\": \"bpmn:StartEvent\", \"entryPointId\": \"b88fbbc7-7281-46af-8358-878db67dc20d\", \"isDefaultEntryPoint\": true}\n    },\n    {\n      \"id\": \"endSuccess\",\n      \"…(2601 more chars)
2026-04-22 22:42:09 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< TOOL RESULT [ERROR]: id=toolu_bdrk_014qtvz3z53DywX2THHwWeb4 | Exit code 1
{
  "Result": "Failure",
  "Message": "Validation failed for /tmp/scaffold_plus_end.flow",
  "Instructions": "Found 1 error(s):\n  - [error] [(root)] Schema validation failed: Invalid input: expected string, received undefined"
}
2026-04-22 22:42:12 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> ASSISTANT BLOCK (ThinkingBlock): ThinkingBlock(thinking='The issue is with the `core.control.end` definition. Let me try without `runtimeConstraints`:', signature='EocCCkgIDRABGAIqQKe/6LfS8HRD0JeHMKdQTF56sNGZKDDf72UNy6K7oTwWdH46Zspek
2026-04-22 22:42:18 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> TOOL CALL: Bash | id=toolu_bdrk_01Rw1D4pZG73WT8tvD6VGQU5 | params={
  "command": "# Try without runtimeConstraints\ncat > /tmp/test_end_no_rc.flow << 'EOF'\n{\n  \"id\": \"00ee8558-d4ca-4464-816e-5ee157e17511\",\n  \"version\": \"1.0.0\",\n  \"name\": \"PathParamsTest\",\n  \"nodes\": [\n    {\n      \"id\": \"start\",\n      \"type\": \"core.trigger.manual\",\n      \"typeVersion\": \"1.0.0\",\n      \"display\": {\"label\": \"Manual trigger\"},\n      \"inputs\": {},\n      \"outputs\": {\n        \"output\": {\"type\": \"object\", \"description\": \"Data passed when manually triggering the workflow.\", \"source\": \"null\", \"var\": \"output\"}\n      },\n      \"model\": {\"type\": \"bpmn:StartEvent\", \"entryPointId\": \"b88fbbc7-7281-46af-8358-878db67dc20d\", \"isDefaultEntryPoint\": true}\n    },\n    {\n      \"id\": \"endSuccess\",\n      \"type…(2547 more chars)
2026-04-22 22:42:20 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< TOOL RESULT [ERROR]: id=toolu_bdrk_01Rw1D4pZG73WT8tvD6VGQU5 | Exit code 1
{
  "Result": "Failure",
  "Message": "Validation failed for /tmp/test_end_no_rc.flow",
  "Instructions": "Found 1 error(s):\n  - [error] [(root)] Schema validation failed: Invalid input: expected string, received undefined"
}
2026-04-22 22:42:23 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> ASSISTANT BLOCK (ThinkingBlock): ThinkingBlock(thinking='The issue is with the `core.control.end` node - even without `runtimeConstraints`. Let me try seeing if the edge is the problem (the edge has a `sourceHandle` field that might 
2026-04-22 22:42:30 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> TOOL CALL: Bash | id=toolu_bdrk_01G4CAgPZUGfh6KgqFfV9ACu | params={
  "command": "# Test with end node but no edge\ncat > /tmp/test_just_end.flow << 'EOF'\n{\n  \"id\": \"00ee8558-d4ca-4464-816e-5ee157e17511\",\n  \"version\": \"1.0.0\",\n  \"name\": \"PathParamsTest\",\n  \"nodes\": [\n    {\n      \"id\": \"start\",\n      \"type\": \"core.trigger.manual\",\n      \"typeVersion\": \"1.0.0\",\n      \"display\": {\"label\": \"Manual trigger\"},\n      \"inputs\": {},\n      \"outputs\": {\n        \"output\": {\"type\": \"object\", \"description\": \"Data passed when manually triggering the workflow.\", \"source\": \"null\", \"var\": \"output\"}\n      },\n      \"model\": {\"type\": \"bpmn:StartEvent\", \"entryPointId\": \"b88fbbc7-7281-46af-8358-878db67dc20d\", \"isDefaultEntryPoint\": true}\n    },\n    {\n      \"id\": \"endSuccess\",\n      \"type\…(2379 more chars)
2026-04-22 22:42:32 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< TOOL RESULT [OK]: id=toolu_bdrk_01G4CAgPZUGfh6KgqFfV9ACu | {
  "Result": "Success",
  "Code": "FlowValidate",
  "Data": {
    "File": "/tmp/test_just_end.flow",
    "Status": "Valid"
  }
}
2026-04-22 22:42:35 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> ASSISTANT BLOCK (ThinkingBlock): ThinkingBlock(thinking='So the end node itself is valid! The issue is with the edge. Specifically, the edge has `"sourceHandle": "output"` which might not be the right field name. Let me check if the 
2026-04-22 22:42:41 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> TOOL CALL: Bash | id=toolu_bdrk_01DdxTmhktYo9TyLgeJ7hB3h | params={
  "command": "# Test edge without sourceHandle\ncat > /tmp/test_edge.flow << 'EOF'\n{\n  \"id\": \"00ee8558-d4ca-4464-816e-5ee157e17511\",\n  \"version\": \"1.0.0\",\n  \"name\": \"PathParamsTest\",\n  \"nodes\": [\n    {\n      \"id\": \"start\",\n      \"type\": \"core.trigger.manual\",\n      \"typeVersion\": \"1.0.0\",\n      \"display\": {\"label\": \"Manual trigger\"},\n      \"inputs\": {},\n      \"outputs\": {\"output\": {\"type\": \"object\", \"description\": \"Data passed when manually triggering the workflow.\", \"source\": \"null\", \"var\": \"output\"}},\n      \"model\": {\"type\": \"bpmn:StartEvent\", \"entryPointId\": \"b88fbbc7-7281-46af-8358-878db67dc20d\", \"isDefaultEntryPoint\": true}\n    },\n    {\n      \"id\": \"endSuccess\",\n      \"type\": \"core.control.end\…(2474 more chars)
2026-04-22 22:42:43 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< TOOL RESULT [ERROR]: id=toolu_bdrk_01DdxTmhktYo9TyLgeJ7hB3h | Exit code 1
{
  "Result": "Failure",
  "Message": "Validation failed for /tmp/test_edge.flow",
  "Instructions": "Found 1 error(s):\n  - [error] [(root)] Schema validation failed: Invalid input: expected string, received undefined"
}
2026-04-22 22:42:48 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> TOOL CALL: Bash | id=toolu_bdrk_01EQWdXyb31toK6jK7B5yk52 | params={
  "command": "# Test with CLI to add an end node and see what it generates\ncd /Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow-ipe-path_params/00/artifacts/skill-flow-ipe-path_params/PathParamsTest/PathParamsTest\n\n# Try using the CLI to add a node to see what format it generates\nuip maestro flow node add PathParamsTest.flow --node-type \"core.control.end\" --output json 2>/dev/null | head -20",
  "description": "Use CLI to add end node and inspect generated format"
}
2026-04-22 22:42:50 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< TOOL RESULT [OK]: id=toolu_bdrk_01EQWdXyb31toK6jK7B5yk52 | {
  "Result": "ValidationError",
  "Message": "error: unknown option '--node-type'",
  "Instructions": "Check command arguments and options. Use --help for usage information."
}
2026-04-22 22:42:52 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> TOOL CALL: Bash | id=toolu_bdrk_015YPcvdq5ws5HnYtRBEGjTz | params={
  "command": "uip maestro flow node --help 2>/dev/null",
  "description": "Check node CLI help"
}
2026-04-22 22:42:54 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< TOOL RESULT [OK]: id=toolu_bdrk_015YPcvdq5ws5HnYtRBEGjTz | {
  "Result": "Success",
  "Code": "Help",
  "Data": {
    "Command": "node",
    "Description": "Manage nodes in a Flow file",
    "Usage": "uip maestro flow node [options] [command]",
    "Arguments": [],
    "Options": [
      {
        "Flags": "-h, --help",
        "Description": "display help for command"
      }
    ],
    "Subcommands": [
      {
        "Name": "add [options] <file> <node-type>",
        "Description": "Add a node to a Flow file.\nFor connector nodes (type uipath.connector), do NOT pass --input here \u2014 run 'node configure' afterwards to supply connection and endpoint details.\nExample: uip maestro flow node add flow.flow uipath.connector.jira.createIssue --label 'Create Jira Issue'"
      },
      {
        "Name": "configure [options] <file> <node-id>",
     …(2872 more chars)
2026-04-22 22:42:57 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> TOOL CALL: Bash | id=toolu_bdrk_01D73qv49VxmzYtTbsmwrosb | params={
  "command": "cd /Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow-ipe-path_params/00/artifacts/skill-flow-ipe-path_params/PathParamsTest/PathParamsTest\n# Use the CLI to add nodes and see what the CLI generates in the flow file\ncp PathParamsTest.flow PathParamsTest.flow.bak\n\n# Add an end node via CLI to see what format it uses\nuip maestro flow node add PathParamsTest.flow \"core.control.end\" --output json 2>/dev/null",
  "description": "Add end node via CLI to see generated format"
}
2026-04-22 22:42:59 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< TOOL RESULT [OK]: id=toolu_bdrk_01D73qv49VxmzYtTbsmwrosb | {
  "Result": "Success",
  "Code": "NodeAddSuccess",
  "Data": {
    "Node": {
      "id": "end1",
      "type": "core.control.end",
      "typeVersion": "1.0.0",
      "ui": {
        "position": {
          "x": 0,
          "y": 0
        }
      },
      "display": {
        "label": "End"
      },
      "inputs": {},
      "model": {
        "type": "bpmn:EndEvent"
      }
    },
    "DefinitionAdded": false,
    "BindingsCreated": 0,
    "VariableCount": 6
  }
}
2026-04-22 22:43:05 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> ASSISTANT BLOCK (ThinkingBlock): ThinkingBlock(thinking='Interesting! The CLI added the end node to the flow, and in doing so it also populated the `variables` section with a `nodes` array instead of `globals`. This is the key differ
2026-04-22 22:43:06 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> TOOL CALL: Read | id=toolu_bdrk_016nVXRUredM5AkHsPqM3TCr | params={
  "file_path": "/Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow-ipe-path_params/00/artifacts/skill-flow-ipe-path_params/PathParamsTest/PathParamsTest/PathParamsTest.flow",
  "offset": 960,
  "limit": 80
}
2026-04-22 22:43:06 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< TOOL RESULT [OK]: id=toolu_bdrk_016nVXRUredM5AkHsPqM3TCr |    960→        "shape": "circle"
   961→      },
   962→      "handleConfiguration": [
   963→        {
   964→          "position": "left",
   965→          "handles": [
   966→            {
   967→              "id": "input",
   968→              "type": "target",
   969→              "handleType": "input"
   970→            }
   971→          ]
   972→        }
   973→      ],
   974→      "model": {
   975→        "type": "bpmn:EndEvent",
   976→        "eventDefinition": "bpmn:TerminateEventDefinition"
   977→      }
   978→    }
   979→  ],
   980→  "bindings": [],
   981→  "variables": {
   982→    "nodes": [
   983→      {
   984→        "id": "start.output",
   985→        "type": "object",
   986→        "description": "Data passed when manually triggering the workflow.",
   987→…(2048 more chars)
2026-04-22 22:43:16 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> ASSISTANT BLOCK (ThinkingBlock): ThinkingBlock(thinking='Now I see the issue! The CLI has:\n1. Changed the `variables` section to use `nodes` array instead of my `globals` array\n2. Added a `"runtime": "maestro"` field to the flow\n3
2026-04-22 22:43:16 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> TOOL CALL: Bash | id=toolu_bdrk_01NAmnnpctxouGKGnLRuQBPw | params={
  "command": "cd /Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow-ipe-path_params/00/artifacts/skill-flow-ipe-path_params/PathParamsTest/PathParamsTest\nuip maestro flow validate PathParamsTest.flow --output json 2>/dev/null",
  "description": "Validate current flow after CLI node add"
}
2026-04-22 22:43:18 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< TOOL RESULT [ERROR]: id=toolu_bdrk_01NAmnnpctxouGKGnLRuQBPw | Exit code 1
{
  "Result": "Failure",
  "Message": "Validation failed for /Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow-ipe-path_params/00/artifacts/skill-flow-ipe-path_params/PathParamsTest/PathParamsTest/PathParamsTest.flow",
  "Instructions": "Found 1 error(s):\n  - [error] [(root)] Schema validation failed: Invalid input: expected string, received undefined"
}
2026-04-22 22:43:22 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> ASSISTANT BLOCK (ThinkingBlock): ThinkingBlock(thinking="Still failing. Let me read the full current flow file to understand what's there now:", signature='Ev8BCkgIDRABGAIqQFPk/LH8xMazWMPCQHnHPYTzZlMRRCMveopK0/IegIsKcjuUS4jCBoV1hjGo8
2026-04-22 22:43:23 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> TOOL CALL: Read | id=toolu_bdrk_01AvVUmU7yrMXqDK5xoxS5yf | params={
  "file_path": "/Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow-ipe-path_params/00/artifacts/skill-flow-ipe-path_params/PathParamsTest/PathParamsTest/PathParamsTest.flow",
  "offset": "1,\n",
  "limit": 160
}
2026-04-22 22:43:23 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< TOOL RESULT [ERROR]: id=toolu_bdrk_01AvVUmU7yrMXqDK5xoxS5yf | <tool_use_error>InputValidationError: Read failed due to the following issue:
The parameter `offset` type is expected as `number` but provided as `string`</tool_use_error>
2026-04-22 22:43:26 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> TOOL CALL: Read | id=toolu_bdrk_01FKG9q99wNWVFaTyxDa95CK | params={
  "file_path": "/Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow-ipe-path_params/00/artifacts/skill-flow-ipe-path_params/PathParamsTest/PathParamsTest/PathParamsTest.flow",
  "offset": 120,
  "limit": 20
}
2026-04-22 22:43:26 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< TOOL RESULT [OK]: id=toolu_bdrk_01FKG9q99wNWVFaTyxDa95CK |    120→      "inputs": {},
   121→      "model": {
   122→        "type": "bpmn:EndEvent"
   123→      }
   124→    }
   125→  ],
   126→  "edges": [
   127→    {
   128→      "id": "edge-start-deleteTask",
   129→      "source": "start",
   130→      "target": "deleteTask",
   131→      "sourceHandle": "output",
   132→      "targetPort": "input"
   133→    },
   134→    {
   135→      "id": "edge-deleteTask-checkSuccess",
   136→      "source": "deleteTask",
   137→      "target": "checkSuccess",
   138→      "sourceHandle": "default",
   139→      "targetPort": "input"

<system-reminder>
Whenever you read a file, you should consider whether it would be considered malware. You CAN and SHOULD provide analysis of malware, what it is doing. But you MUST refuse to improve or augment the code…(118 more chars)
2026-04-22 22:43:35 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> ASSISTANT BLOCK (ThinkingBlock): ThinkingBlock(thinking='The edges have `sourceHandle`. Looking at the validation error - it\'s at `(root)` suggesting a top-level issue. Looking at the edge structure, the field name is `sourceHandle`
2026-04-22 22:43:37 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> TOOL CALL: Bash | id=toolu_bdrk_01VNpT7JQemQQRVjRsYzr3jT | params={
  "command": "cd /Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow-ipe-path_params/00/artifacts/skill-flow-ipe-path_params/PathParamsTest/PathParamsTest\n\n# Use the CLI edge add command to create edges and see the required format\nuip maestro flow edge --help 2>/dev/null | python3 -c \"import json,sys; d=json.load(sys.stdin); [print(s['Name'], '-', s['Description']) for s in d['Data']['Subcommands']]\"",
  "description": "Check edge CLI commands"
}
2026-04-22 22:43:38 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< TOOL RESULT [OK]: id=toolu_bdrk_01VNpT7JQemQQRVjRsYzr3jT | list <file> - List all edges in a Flow file
add [options] <file> <source-id> <target-id> - Add an edge between two nodes in a Flow file
delete <file> <edge-id> - Delete an edge from a Flow file.
Use 'uip flow edge list' to find the edge ID.
help [command] - display help for command
2026-04-22 22:43:43 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> TOOL CALL: Bash | id=toolu_bdrk_01P7RWWeQiiMEMPEiiKfCUjj | params={
  "command": "cd /Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow-ipe-path_params/00/artifacts/skill-flow-ipe-path_params/PathParamsTest/PathParamsTest\n\n# Restore to the original scaffolded flow + the nodes I added (without edges)\n# And use the CLI to add an edge to see the format\ncp PathParamsTest.flow.bak /tmp/test_edge_cli.flow\n# Add end node first\nuip maestro flow node add /tmp/test_edge_cli.flow \"core.control.end\" --output json 2>/dev/null | tail -5\n# Then add edge\nuip maestro flow edge add /tmp/test_edge_cli.flow start end1 --output json 2>/dev/null",
  "description": "Use CLI to add edge between start and end nodes"
}
2026-04-22 22:43:47 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< TOOL RESULT [OK]: id=toolu_bdrk_01P7RWWeQiiMEMPEiiKfCUjj |     "DefinitionAdded": false,
    "BindingsCreated": 0,
    "VariableCount": 6
  }
}
{
  "Result": "Success",
  "Code": "EdgeAddSuccess",
  "Data": {
    "Edge": {
      "id": "start-output-end1-input",
      "sourceNodeId": "start",
      "sourcePort": "output",
      "targetNodeId": "end1",
      "targetPort": "input"
    }
  }
}
2026-04-22 22:43:50 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> ASSISTANT BLOCK (ThinkingBlock): ThinkingBlock(thinking='The edge format uses different field names than what I was using:\n- `sourceNodeId` instead of `source`\n- `sourcePort` instead of `sourceHandle`\n- `targetNodeId` instead of `
2026-04-22 22:43:51 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> TOOL CALL: Bash | id=toolu_bdrk_01MqzHDQSCKN7K4hKtR862nj | params={
  "command": "cat /tmp/test_edge_cli.flow | python3 -c \"import json,sys; d=json.load(sys.stdin); print(json.dumps(d['edges'], indent=2))\"",
  "description": "Check generated edge format in flow file"
}
2026-04-22 22:43:51 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< TOOL RESULT [OK]: id=toolu_bdrk_01MqzHDQSCKN7K4hKtR862nj | [
  {
    "id": "edge-start-deleteTask",
    "source": "start",
    "target": "deleteTask",
    "sourceHandle": "output",
    "targetPort": "input"
  },
  {
    "id": "edge-deleteTask-checkSuccess",
    "source": "deleteTask",
    "target": "checkSuccess",
    "sourceHandle": "default",
    "targetPort": "input"
  },
  {
    "id": "edge-checkSuccess-logSuccess",
    "source": "checkSuccess",
    "target": "logSuccess",
    "sourceHandle": "true",
    "targetPort": "input"
  },
  {
    "id": "edge-checkSuccess-terminateFailure",
    "source": "checkSuccess",
    "target": "terminateFailure",
    "sourceHandle": "false",
    "targetPort": "input"
  },
  {
    "id": "edge-logSuccess-endSuccess",
    "source": "logSuccess",
    "target": "endSuccess",
    "sourceHandle": "success",
    "target…(177 more chars)
2026-04-22 22:43:54 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> ASSISTANT BLOCK (ThinkingBlock): ThinkingBlock(thinking='The generated edge by the CLI uses:\n- `sourceNodeId` \n- `sourcePort`\n- `targetNodeId`\n- `targetPort`\n\nWhile my manually created edges used:\n- `source`\n- `sourceHandle`\
2026-04-22 22:43:54 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> TOOL CALL: Bash | id=toolu_bdrk_01A4ZxHu58sh5amp7CJWRd7U | params={
  "command": "uip maestro flow validate /tmp/test_edge_cli.flow --output json 2>/dev/null",
  "description": "Validate test flow with CLI-generated edge"
}
2026-04-22 22:43:56 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< TOOL RESULT [ERROR]: id=toolu_bdrk_01A4ZxHu58sh5amp7CJWRd7U | Exit code 1
{
  "Result": "Failure",
  "Message": "Validation failed for /tmp/test_edge_cli.flow",
  "Instructions": "Found 1 error(s):\n  - [error] [(root)] Schema validation failed: Invalid input: expected string, received undefined"
}
2026-04-22 22:43:59 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> ASSISTANT BLOCK (ThinkingBlock): ThinkingBlock(thinking='Still failing even with the CLI-generated edge. And this file has the edges I originally wrote plus the new CLI-generated edge. But the validation is still failing.\n\nLet me t
2026-04-22 22:44:00 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> TOOL CALL: Bash | id=toolu_bdrk_01CjE4BeJAZS3R917J4DrYUj | params={
  "command": "# Start completely fresh - create a new minimal flow with CLI only\ncp PathParamsTest.flow.bak /tmp/fresh_test.flow\nuip maestro flow validate /tmp/fresh_test.flow --output json 2>/dev/null",
  "description": "Validate just the original scaffolded flow backup"
}
2026-04-22 22:44:02 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< TOOL RESULT [ERROR]: id=toolu_bdrk_01CjE4BeJAZS3R917J4DrYUj | Exit code 1
{
  "Result": "Failure",
  "Message": "Validation failed for /tmp/fresh_test.flow",
  "Instructions": "Found 1 error(s):\n  - [error] [(root)] Schema validation failed: Invalid input: expected string, received undefined"
}
2026-04-22 22:44:02 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< RESULT: cost=$1.7417797499999998, usage={'input_tokens': 52, 'cache_creation_input_tokens': 83563, 'cache_read_input_tokens': 3194175, 'output_tokens': 31334, 'server_tool_use': {'web_search_requests': 0, 'web_fetch_requests': 0}, 'service_
2026-04-22 22:44:02 [DEBUG] coder_eval.agents.claude_code_agent: [coder] session_id changed: None -> 7927d13c-8738-4ee3-9466-ac45d0e8fd2f
2026-04-22 22:44:02 [DEBUG] coder_eval.agents.claude_code_agent: [coder] Agent query stream ended
2026-04-22 22:44:02 [WARNING] coder_eval.agents.claude_code_agent: [coder] Agent exhausted max_turns (51/50) — the SDK hit the turn limit before the agent completed.
2026-04-22 22:44:02 [DEBUG] coder_eval.orchestrator: Agent response received (429 chars)
2026-04-22 22:44:02 [DEBUG] coder_eval.orchestrator: Checking success criteria
2026-04-22 22:44:02 [DEBUG] coder_eval.criteria.run_command: Running command for criterion 'Flow file exists and is valid JSON': python3 -c "import json,glob; flows=glob.glob('**/PathParamsTest*.flow',recursive=True); assert flows, 'No flow found'; f=json.load(open(flows[0])); assert 'nodes' in f and 'edges' in f; nn=len(f['nodes']); ne=len(f['edges']); print('OK: %d nodes, %d edges'%(nn,ne))"
2026-04-22 22:44:02 [DEBUG] coder_eval.sandbox: Command 'python3 -c "import json,glob; flows=glob.glob('**/PathParamsTest*.flow',recursive=True); assert flows, 'No flow found'; f=json.load(open(flows[0])); assert 'nodes' in f and 'edges' in f; nn=len(f['nodes']); ne=len(f['edges']); print('OK: %d nodes, %d edges'%(nn,ne))"' exited with code 0
2026-04-22 22:44:02 [DEBUG] coder_eval.sandbox: STDOUT:
---
OK: 7 nodes, 5 edges
---
2026-04-22 22:44:02 [INFO] coder_eval.evaluation.checker: Criterion 'run_command' score: 1.00
2026-04-22 22:44:02 [DEBUG] coder_eval.criteria.run_command: Running command for criterion 'Flow has a connector node referencing uipath-google-tasks': python3 -c "import json,glob; flows=glob.glob('**/PathParamsTest*.flow',recursive=True); assert flows; content=open(flows[0]).read(); assert 'uipath-google-tasks' in content, 'Connector key not found'; print('OK: connector key present')"
2026-04-22 22:44:02 [DEBUG] coder_eval.sandbox: Command 'python3 -c "import json,glob; flows=glob.glob('**/PathParamsTest*.flow',recursive=True); assert flows; content=open(flows[0]).read(); assert 'uipath-google-tasks' in content, 'Connector key not found'; print('OK: connector key present')"' exited with code 1
2026-04-22 22:44:02 [DEBUG] coder_eval.sandbox: STDERR:
---
Traceback (most recent call last):
  File "<string>", line 1, in <module>
    import json,glob; flows=glob.glob('**/PathParamsTest*.flow',recursive=True); assert flows; content=open(flows[0]).read(); assert 'uipath-google-tasks' in content, 'Connector key not found'; print('OK: connector key present')
                                                                                                                                     ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
AssertionError: Connector key not found
---
2026-04-22 22:44:02 [INFO] coder_eval.evaluation.checker: Criterion 'run_command' score: 0.00
2026-04-22 22:44:02 [DEBUG] coder_eval.criteria.run_command: Running command for criterion 'Flow has Decision and Terminate nodes': python3 -c "import json,glob; flows=glob.glob('**/PathParamsTest*.flow',recursive=True); assert flows; f=json.load(open(flows[0])); types=[n.get('type','') for n in f['nodes']]; assert any('decision' in t.lower() for t in types), 'No Decision node'; assert any('terminate' in t.lower() for t in types), 'No Terminate node'; print('OK: Decision and Terminate nodes present')"
2026-04-22 22:44:02 [DEBUG] coder_eval.sandbox: Command 'python3 -c "import json,glob; flows=glob.glob('**/PathParamsTest*.flow',recursive=True); assert flows; f=json.load(open(flows[0])); types=[n.get('type','') for n in f['nodes']]; assert any('decision' in t.lower() for t in types), 'No Decision node'; assert any('terminate' in t.lower() for t in types), 'No Terminate node'; print('OK: Decision and Terminate nodes present')"' exited with code 0
2026-04-22 22:44:02 [DEBUG] coder_eval.sandbox: STDOUT:
---
OK: Decision and Terminate nodes present
---
2026-04-22 22:44:02 [INFO] coder_eval.evaluation.checker: Criterion 'run_command' score: 1.00
2026-04-22 22:44:02 [INFO] coder_eval.evaluation.checker: Criterion 'command_executed' score: 0.00
2026-04-22 22:44:02 [INFO] coder_eval.orchestrator: Success criteria: 2/4 passed, weighted score: 0.500
2026-04-22 22:44:02 [DEBUG] coder_eval.orchestrator: Tool calls for iteration 1:
  1. [success] Skill → Launching skill: uipath:uipath-maestro-flow
  2. [success] Bash `UIP=$(command -v uip 2>/dev/null || echo "$(npm root -g 2>/dev/null | sed 's|/node_modules$||')/bin/uip")
CURRENT=$($UIP` → UIP binary: /Users/religa/src/coder_eval/.venv/bin/uip
Version: 0.3.4
Using: uip
  3. [success] Bash `uip login status --output json 2>/dev/null` → {
  "Result": "Success",
  "Code": "LogIn",
  "Data": {
    "Status": "Logged in
  4. [success] Bash `ls *.uipx 2>/dev/null || echo "No .uipx files found"
ls -la` → (eval):1: no matches found: *.uipx
No .uipx files found
total 0
drwxr-xr-x  3 re
  5. [success] Bash `uip solution new "PathParamsTest" --output json 2>/dev/null` → {
  "Result": "Success",
  "Code": "SolutionNew",
  "Data": {
    "Status": "Cre
  6. [success] Bash `cd PathParamsTest && uip maestro flow init PathParamsTest --output json 2>/dev/null` → {
  "Result": "Success",
  "Code": "FlowInit",
  "Data": {
    "Status": "Create
  7. [success] Bash `uip solution project add \
  /Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow-ipe-path_params/00` → {
  "Result": "Success",
  "Code": "ProjectAdd",
  "Data": {
    "Status": "Adde
  8. [success] Bash `uip maestro flow registry pull --output json 2>/dev/null | head -5
# Also search for Google Tasks connector
uip maestro ` → {
  "Result": "Success",
  "Code": "NodePullSuccess",
  "Data": {
    "NodesCoun
  9. [success] Bash `uip maestro flow registry search "google" --output json 2>/dev/null | python3 -c "import json,sys; data=json.load(sys.st` → (Bash completed with no output)
  10. [success] Bash `uip maestro flow registry search "google" --output json 2>/dev/null` → <persisted-output>
Output too large (139.2KB). Full output saved to: /Users/reli
  11. [success] Bash `cat /Users/religa/.claude/projects/-Users-religa-src-coder-eval-runs-2026-04-22-20-39-58-default-skill-flow-ipe-path-par` → (Bash completed with no output)
  12. [success] Bash `cat /Users/religa/.claude/projects/-Users-religa-src-coder-eval-runs-2026-04-22-20-39-58-default-skill-flow-ipe-path-par` → Total Google nodes: 409
Task-related: 0
  13. [success] Bash `# Search specifically for tasks connector
uip maestro flow registry search "tasks" --output json 2>/dev/null | python3 -` → Total nodes: 9
uipath.agent.autonomous | Autonomous Agent
uipath.connector.uipat
  14. [success] Bash `# No Google Tasks connector found. Let's search specifically for "delete" operations in the Google Gmail connector
cat /` → Unique Google connector packages:
  trigger
  uipath-google-cloudplatform
  uipa
  15. [success] Bash `uip maestro flow registry search "http" --output json 2>/dev/null | python3 -c "
import json,sys
data=json.load(sys.stdi` → core.action.http | HTTP Request
core.action.http.v2 | Managed HTTP Request
uipat
  16. [success] Bash `uip maestro flow registry get "core.action.http" --output json 2>/dev/null` → {
  "Result": "Success",
  "Code": "NodeGetSuccess",
  "Data": {
    "Node": {
 
  17. [success] Bash `uip maestro flow registry get "core.logic.decision" --output json 2>/dev/null
uip maestro flow registry get "core.logic.` → {
  "Result": "Success",
  "Code": "NodeGetSuccess",
  "Data": {
    "Node": {
 
  18. [error] Bash `cat PathParamsTest/PathParamsTest/PathParamsTest.flow 2>/dev/null || cat PathParamsTest/PathParamsTest/*.flow 2>/dev/nul` → Exit code 1
(eval):1: no matches found: PathParamsTest/PathParamsTest/*.flow
  19. [error] Bash `find PathParamsTest -name "*.flow" 2>/dev/null
ls -la PathParamsTest/PathParamsTest/ 2>/dev/null` → Exit code 1
PathParamsTest/PathParamsTest.flow
  20. [success] Bash `find . -name "*.flow" 2>/dev/null
ls -la PathParamsTest/ 2>/dev/null` → ./PathParamsTest/PathParamsTest.flow
total 16
drwxr-xr-x  4 religa  staff   128 
  21. [error] Read /Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow-ipe-path_params/00/artifacts/skill-flow-ipe-path_params/PathParamsTest/PathParamsTest.flow → File does not exist. Note: your current working directory is /Users/religa/src/c
  22. [error] Bash `cat /Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow-ipe-path_params/00/artifacts/skill-flow-ipe` → Exit code 1
cat: /Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/s
  23. [success] Bash `pwd && find . -name "*.flow" 2>/dev/null` → /Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow-ipe-pat
  24. [success] Read /Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow-ipe-path_params/00/artifacts/skill-flow-ipe-path_params/PathParamsTest/PathParamsTest/PathParamsTest.flow →      1→{
     2→  "id": "00ee8558-d4ca-4464-816e-5ee157e17511",
     3→  "versio
  25. [error] Bash `uip maestro flow registry get "core.logic.end" --output json 2>/dev/null | python3 -c "import json,sys; d=json.load(sys.` → Exit code 1
Traceback (most recent call last):
  File "<string>", line 1, in <mo
  26. [error] Bash `uip maestro flow registry get "core.logic.end" --output json 2>/dev/null` → Exit code 1
{
  "Result": "Failure",
  "Message": "Node not found",
  "Instructi
  27. [success] Bash `uip maestro flow registry search "end" --output json 2>/dev/null | python3 -c "
import json,sys
data=json.load(sys.stdin` → core.control.end | End
core.logic.terminate | Terminate
uipath.connector.uipath-
  28. [success] Bash `uip maestro flow registry get "core.control.end" --output json 2>/dev/null` → {
  "Result": "Success",
  "Code": "NodeGetSuccess",
  "Data": {
    "Node": {
 
  29. [success] Write /Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow-ipe-path_params/00/artifacts/skill-flow-ipe-path_params/PathParamsTest/PathParamsTest/PathParamsTest.flow → The file /Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flo
  30. [error] Bash `cd /Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow-ipe-path_params/00/artifacts/skill-flow-ipe-` → Exit code 1
{
  "Result": "Failure",
  "Message": "Validation failed for /Users/
  31. [success] Edit /Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow-ipe-path_params/00/artifacts/skill-flow-ipe-path_params/PathParamsTest/PathParamsTest/PathParamsTest.flow → The file /Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flo
  32. [error] Bash `cd /Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow-ipe-path_params/00/artifacts/skill-flow-ipe-` → Exit code 1
{
  "Result": "Failure",
  "Message": "Validation failed for /Users/
  33. [error] Bash `cd /Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow-ipe-path_params/00/artifacts/skill-flow-ipe-` → Exit code 1
{
  "Result": "Failure",
  "Message": "Validation failed for /tmp/mi
  34. [success] Bash `# Test with the original scaffolded flow content
cat > /tmp/scaffold_test.flow << 'EOF'
{
  "id": "00ee8558-d4ca-4464-81` → {
  "Result": "Success",
  "Code": "FlowValidate",
  "Data": {
    "File": "/tmp
  35. [error] Bash `# Add end node to scaffolded flow
cat > /tmp/scaffold_plus_end.flow << 'EOF'
{
  "id": "00ee8558-d4ca-4464-816e-5ee157e1` → Exit code 1
{
  "Result": "Failure",
  "Message": "Validation failed for /tmp/sc
  36. [error] Bash `# Try without runtimeConstraints
cat > /tmp/test_end_no_rc.flow << 'EOF'
{
  "id": "00ee8558-d4ca-4464-816e-5ee157e17511` → Exit code 1
{
  "Result": "Failure",
  "Message": "Validation failed for /tmp/te
  37. [success] Bash `# Test with end node but no edge
cat > /tmp/test_just_end.flow << 'EOF'
{
  "id": "00ee8558-d4ca-4464-816e-5ee157e17511"` → {
  "Result": "Success",
  "Code": "FlowValidate",
  "Data": {
    "File": "/tmp
  38. [error] Bash `# Test edge without sourceHandle
cat > /tmp/test_edge.flow << 'EOF'
{
  "id": "00ee8558-d4ca-4464-816e-5ee157e17511",
  ` → Exit code 1
{
  "Result": "Failure",
  "Message": "Validation failed for /tmp/te
  39. [success] Bash `# Test with CLI to add an end node and see what it generates
cd /Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/de` → {
  "Result": "ValidationError",
  "Message": "error: unknown option '--node-typ
  40. [success] Bash `uip maestro flow node --help 2>/dev/null` → {
  "Result": "Success",
  "Code": "Help",
  "Data": {
    "Command": "node",
  
  41. [success] Bash `cd /Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow-ipe-path_params/00/artifacts/skill-flow-ipe-` → {
  "Result": "Success",
  "Code": "NodeAddSuccess",
  "Data": {
    "Node": {
 
  42. [success] Read /Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow-ipe-path_params/00/artifacts/skill-flow-ipe-path_params/PathParamsTest/PathParamsTest/PathParamsTest.flow →    960→        "shape": "circle"
   961→      },
   962→      "handleConfigurati
  43. [error] Bash `cd /Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow-ipe-path_params/00/artifacts/skill-flow-ipe-` → Exit code 1
{
  "Result": "Failure",
  "Message": "Validation failed for /Users/
  44. [error] Read /Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow-ipe-path_params/00/artifacts/skill-flow-ipe-path_params/PathParamsTest/PathParamsTest/PathParamsTest.flow → <tool_use_error>InputValidationError: Read failed due to the following issue:
Th
  45. [success] Read /Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow-ipe-path_params/00/artifacts/skill-flow-ipe-path_params/PathParamsTest/PathParamsTest/PathParamsTest.flow →    120→      "inputs": {},
   121→      "model": {
   122→        "type": "bpmn:
  46. [success] Bash `cd /Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow-ipe-path_params/00/artifacts/skill-flow-ipe-` → list <file> - List all edges in a Flow file
add [options] <file> <source-id> <ta
  47. [success] Bash `cd /Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow-ipe-path_params/00/artifacts/skill-flow-ipe-` →     "DefinitionAdded": false,
    "BindingsCreated": 0,
    "VariableCount": 6
 
  48. [success] Bash `cat /tmp/test_edge_cli.flow | python3 -c "import json,sys; d=json.load(sys.stdin); print(json.dumps(d['edges'], indent=2` → [
  {
    "id": "edge-start-deleteTask",
    "source": "start",
    "target": "d
  49. [error] Bash `uip maestro flow validate /tmp/test_edge_cli.flow --output json 2>/dev/null` → Exit code 1
{
  "Result": "Failure",
  "Message": "Validation failed for /tmp/te
  50. [error] Bash `# Start completely fresh - create a new minimal flow with CLI only
cp PathParamsTest.flow.bak /tmp/fresh_test.flow
uip m` → Exit code 1
{
  "Result": "Failure",
  "Message": "Validation failed for /tmp/fr
2026-04-22 22:44:02 [WARNING] coder_eval.orchestrator: Agent exhausted max_turns (50) without passing criteria. Stopping evaluation — further iterations unlikely to succeed.
2026-04-22 22:44:02 [INFO] coder_eval.orchestrator: Running post-run command: python3 $SKILLS_REPO_PATH/tests/tasks/uipath-maestro-flow/_shared/cleanup_solutions.py
2026-04-22 22:44:04 [WARNING] coder_eval.orchestrator: [post_run stderr] cleanup_solutions: failed to delete a6b88cfe-3b2d-41d8-a879-0b4f695c109b (exit 1):
2026-04-22 22:44:04 [WARNING] coder_eval.orchestrator: [post_run stderr] cleanup_solutions: summary policy=always deleted=0 preserved=0 skipped=0 failed=1
2026-04-22 22:44:04 [INFO] coder_eval.orchestrator: Sandbox preserved (in-place): runs/2026-04-22_20-39-58/default/skill-flow-ipe-path_params/00/artifacts/skill-flow-ipe-path_params