Terminate

Failed

skill-flow--terminate · run 2026-04-22_20-39-58

Score: 0.38
Duration: 197.9s
Cost: $0.585
Final status: FAILURE
Tool calls: 23

uipath-maestro-flowe2egenerateootb

Prompt

Create a UiPath Flow project named "TerminateParallel" with two parallel
branches from the trigger:

- Branch A: immediately terminates the entire workflow.
- Branch B: waits 10 seconds, then ends and outputs the message "done".

Both branches should start at the same time from the trigger node.

Do NOT run flow debug — just validate the flow.
Do NOT ask for approval, confirmation, or feedback. Do NOT pause between planning and implementation. Build the complete flow end-to-end in a single pass.
Before starting, load the uipath-maestro-flow skill. Read and follow its workflow steps exactly.

Success criteria (2)

PASSuip maestro flow validate passes on the flow filescore 1

Command: uip maestro flow validate TerminateParallel/TerminateParallel/TerminateParallel.flow
Exit code: 0 (expected: 0)
Stdout:
{
  "Result": "Success",
  "Code": "FlowValidate",
  "Data": {
    "File": "/Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow--terminate/00/artifacts/skill-flow--terminate/TerminateParallel/TerminateParallel/TerminateParallel.flow",
    "Status": "Valid",
    "Warnings": "1 warning(s):\n  - [nodes[terminateNode].outputs.message.source] [MISSING_OUTPUT_MAPPING] \"Terminate Workflow\" is missing output mapping for \"message\""
  }
}

Stderr:
Tool factory already registered for project type 'Flow', skipping.

FAILFlow has Terminate + Delay nodes in parallel, terminates before delay completesscore 0

Command: python3 $TASK_DIR/check_terminate_flow.py
Exit code: 1 (expected: 0)
Stdout:
OK: Parallel branches from trigger verified

Stderr:
FAIL: flow debug exit 1
stdout: {
  "Result": "Failure",
  "Message": "Import failed (400): {\"code\":\"20001\",\"message\":\"The solution archive does not contain any valid projects.\",\"translatedMessage\":null}",
  "Instructions": "Import failed (400): {\"code\":\"20001\",\"message\":\"The solution archive does not contain any valid projects.\",\"translatedMessage\":null}"
}

stderr: Tool factory already registered for project type 'Flow', skipping.

Command timeline (23)

agent tool calls in order

1.Skilluipath:uipath-maestro-flow
2.BashResolve uip binary and detect command prefix
3.Read/Users/religa/src/skills/skills/uipath-maestro-flow/references/flow-file-format.md
4.Read/Users/religa/src/skills/skills/uipath-maestro-flow/references/plugins/terminate/impl.md
5.Read/Users/religa/src/skills/skills/uipath-maestro-flow/references/plugins/delay/impl.md
6.Read/Users/religa/src/skills/skills/uipath-maestro-flow/references/plugins/end/impl.md
7.BashCheck working directory contents
8.BashCreate new solution named TerminateParallel
9.BashCreate flow project inside solution folder
10.BashAdd flow project to solution
11.BashInspect created project structure
12.BashInspect full solution directory structure
13.BashList solution directory contents
14.Read/Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow--terminate/00/artifacts/skill-flow--terminate/TerminateParallel/…
15.BashGet registry definitions for all node types
16.Read/Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow--terminate/00/artifacts/skill-flow--terminate/TerminateParallel/…
17.Read/Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow--terminate/00/artifacts/skill-flow--terminate/TerminateParallel/…
18.Write/Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow--terminate/00/artifacts/skill-flow--terminate/TerminateParallel/…
19.BashValidate the TerminateParallel flow
20.BashValidate the flow from correct path
21.BashCheck current directory and find flow files
22.BashValidate the flow with correct relative path
23.BashAuto-layout the flow nodes

Artifacts

task.log

33,650 bytes · click to view

2026-04-22 23:28:53 [DEBUG] coder_eval.criteria: Criteria already discovered, skipping
2026-04-22 23:28:53 [DEBUG] coder_eval.criteria: Validated 16 criterion checkers
2026-04-22 23:28:53 [INFO] coder_eval.orchestrator: API routing: aws_bedrock
2026-04-22 23:28:53 [INFO] coder_eval.orchestrator: Starting iteration 1/1
2026-04-22 23:28:53 [DEBUG] coder_eval.orchestrator: Sending prompt: Create a UiPath Flow project named "TerminateParallel" with two parallel
branches from the trigger:
...
2026-04-22 23:28:53 [DEBUG] coder_eval.agents.claude_code_agent: [coder] Starting agent query stream...
2026-04-22 23:29:07 [DEBUG] coder_eval.agents.claude_code_agent: [coder] --- SYSTEM (hook_started): {'type': 'system', 'subtype': 'hook_started', 'hook_id': '65ce9188-93b1-4575-aff6-3151d1cfbd89', 'hook_name': 'SessionStart:startup', 'hook_event': 'SessionStart', 'uuid': '8cc4de33-c8ee-4016-b85c-d18
2026-04-22 23:29:07 [DEBUG] coder_eval.agents.claude_code_agent: [coder] --- SYSTEM (hook_started): {'type': 'system', 'subtype': 'hook_started', 'hook_id': 'ee764727-4b70-42c8-9ce8-bbbc5c5326d8', 'hook_name': 'SessionStart:startup', 'hook_event': 'SessionStart', 'uuid': 'f1eca60f-1026-461a-aa1b-419
2026-04-22 23:29:07 [DEBUG] coder_eval.agents.claude_code_agent: [coder] --- SYSTEM (hook_response): {'type': 'system', 'subtype': 'hook_response', 'hook_id': 'ee764727-4b70-42c8-9ce8-bbbc5c5326d8', 'hook_name': 'SessionStart:startup', 'hook_event': 'SessionStart', 'output': '', 'stdout': '', 'stderr
2026-04-22 23:29:07 [DEBUG] coder_eval.agents.claude_code_agent: [coder] --- SYSTEM (hook_response): {'type': 'system', 'subtype': 'hook_response', 'hook_id': '65ce9188-93b1-4575-aff6-3151d1cfbd89', 'hook_name': 'SessionStart:startup', 'hook_event': 'SessionStart', 'output': '@uipath/cli is already i
2026-04-22 23:29:07 [DEBUG] coder_eval.agents.claude_code_agent: [coder] --- SYSTEM (init): {'type': 'system', 'subtype': 'init', 'cwd': '/Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow--terminate/00/artifacts/skill-flow--terminate', 'session_id': 'b68daadb-ad4d-4ef1
2026-04-22 23:29:11 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> TOOL CALL: Skill | id=toolu_bdrk_016y4r86WPxEfP6c2tkeLVgP | params={
  "skill": "uipath:uipath-maestro-flow"
}
2026-04-22 23:29:11 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< TOOL RESULT [OK]: id=toolu_bdrk_016y4r86WPxEfP6c2tkeLVgP | Launching skill: uipath:uipath-maestro-flow
2026-04-22 23:29:21 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> ASSISTANT BLOCK (ThinkingBlock): ThinkingBlock(thinking='Let me follow the skill\'s workflow steps to build this UiPath Flow project. Let me start by reading the necessary reference files and then executing the steps.\n\nThe task is:
2026-04-22 23:29:23 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> TOOL CALL: Bash | id=toolu_bdrk_014f254635pZW4z8EktBK9q3 | params={
  "command": "UIP=$(command -v uip 2>/dev/null || echo \"$(npm root -g 2>/dev/null | sed 's|/node_modules$||')/bin/uip\")\nCURRENT=$($UIP --version 2>/dev/null | awk '{print $NF}')\necho \"UIP binary: $UIP\"\necho \"Version: $CURRENT\"\nMIN_VERSION=\"0.3.4\"\nif [ \"$(printf '%s\\n%s\\n' \"$MIN_VERSION\" \"$CURRENT\" | sort -V | head -n1)\" = \"$MIN_VERSION\" ]; then\n  FLOW_CMD=\"uip maestro flow\"\nelse\n  FLOW_CMD=\"uip flow\"\nfi\necho \"Using: $FLOW_CMD\"",
  "description": "Resolve uip binary and detect command prefix"
}
2026-04-22 23:29:24 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< TOOL RESULT [OK]: id=toolu_bdrk_014f254635pZW4z8EktBK9q3 | UIP binary: /Users/religa/src/coder_eval/.venv/bin/uip
Version: 0.3.4
Using: uip maestro flow
2026-04-22 23:29:27 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> TOOL CALL: Read | id=toolu_bdrk_01XpruPf7HvMpNiDhr9rxQAp | params={
  "file_path": "/Users/religa/src/skills/skills/uipath-maestro-flow/references/flow-file-format.md"
}
2026-04-22 23:29:27 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> TOOL CALL: Read | id=toolu_bdrk_01UfUBxrvVRmzHEoQrt2zob9 | params={
  "file_path": "/Users/religa/src/skills/skills/uipath-maestro-flow/references/plugins/terminate/impl.md"
}
2026-04-22 23:29:28 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> TOOL CALL: Read | id=toolu_bdrk_011PrqhrDN4u1DwVjE53rLFm | params={
  "file_path": "/Users/religa/src/skills/skills/uipath-maestro-flow/references/plugins/delay/impl.md"
}
2026-04-22 23:29:28 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> TOOL CALL: Read | id=toolu_bdrk_017GMdEoxisxdFRULMBr5LtZ | params={
  "file_path": "/Users/religa/src/skills/skills/uipath-maestro-flow/references/plugins/end/impl.md"
}
2026-04-22 23:29:28 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< TOOL RESULT [OK]: id=toolu_bdrk_01XpruPf7HvMpNiDhr9rxQAp |      1→# UiPath Flow File Format
     2→
     3→The `.flow` file is a JSON document at `<ProjectName>.flow` in the project root. It is the **only file you should edit** — other generated files will be overwritten.
     4→
     5→## Top-level structure
     6→
     7→```json
     8→{
     9→  "id": "<uuid>",
    10→  "version": "1.0.0",
    11→  "name": "MyFlow",
    12→  "nodes": [],
    13→  "edges": [],
    14→  "definitions": [],
    15→  "bindings": [],
    16→  "variables": {},
    17→  "layout": {
    18→    "nodes": {}
    19→  }
    20→}
    21→```
    22→
    23→`solutionId` and `projectId` may also appear at the top level — these are auto-populated by `uip maestro flow init` and packaging. Do not add them manually.
    24→
    25→> **`bindings[]`** holds Orchestrator resource ref…(20222 more chars)
2026-04-22 23:29:28 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< TOOL RESULT [OK]: id=toolu_bdrk_011PrqhrDN4u1DwVjE53rLFm |      1→# Delay Node — Implementation
     2→
     3→## Node Type
     4→
     5→`core.logic.delay`
     6→
     7→## Registry Validation
     8→
     9→```bash
    10→uip maestro flow registry get core.logic.delay --output json
    11→```
    12→
    13→Confirm: input port `input`, output port `output`, required inputs `timerType` and `timerPreset`.
    14→
    15→## JSON Structure
    16→
    17→### Duration-Based (Preset)
    18→
    19→```json
    20→{
    21→  "id": "wait15min",
    22→  "type": "core.logic.delay",
    23→  "typeVersion": "1.0.0",
    24→  "display": { "label": "Wait 15 Minutes" },
    25→  "inputs": {
    26→    "timerType": "timeDuration",
    27→    "timerPreset": "PT15M"
    28→  },
    29→  "model": {
    30→    "type": "bpmn:IntermediateCatchEvent",
    31→    "e…(2357 more chars)
2026-04-22 23:29:28 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< TOOL RESULT [OK]: id=toolu_bdrk_017GMdEoxisxdFRULMBr5LtZ |      1→# End Node — Implementation
     2→
     3→## Node Type
     4→
     5→`core.control.end`
     6→
     7→## Registry Validation
     8→
     9→```bash
    10→uip maestro flow registry get core.control.end --output json
    11→```
    12→
    13→Confirm: input port `input`, no output ports.
    14→
    15→## JSON Structure
    16→
    17→### Without Output Mapping
    18→
    19→```json
    20→{
    21→  "id": "doneSuccess",
    22→  "type": "core.control.end",
    23→  "typeVersion": "1.0.0",
    24→  "display": { "label": "Done" },
    25→  "inputs": {},
    26→  "model": { "type": "bpmn:EndEvent" }
    27→}
    28→```
    29→
    30→### With Output Mapping
    31→
    32→When the workflow declares `out` variables, every End node must map all of them:
    33→
    34→```json
    35→…(1895 more chars)
2026-04-22 23:29:28 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< TOOL RESULT [OK]: id=toolu_bdrk_01UfUBxrvVRmzHEoQrt2zob9 |      1→# Terminate Node — Implementation
     2→
     3→## Node Type
     4→
     5→`core.logic.terminate`
     6→
     7→## Registry Validation
     8→
     9→```bash
    10→uip maestro flow registry get core.logic.terminate --output json
    11→```
    12→
    13→Confirm: input port `input`, no output ports.
    14→
    15→## JSON Structure
    16→
    17→```json
    18→{
    19→  "id": "abortOnError",
    20→  "type": "core.logic.terminate",
    21→  "typeVersion": "1.0.0",
    22→  "display": { "label": "Abort" },
    23→  "inputs": {},
    24→  "model": { "type": "bpmn:EndEvent" }
    25→}
    26→```
    27→
    28→## Adding / Editing
    29→
    30→For step-by-step add, delete, and wiring procedures, see [flow-editing-operations.md](../../flow-editing-operations.md). Use the JSON str…(1155 more chars)
2026-04-22 23:29:40 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> ASSISTANT BLOCK (ThinkingBlock): ThinkingBlock(thinking='Now I have a good understanding of the structure. Let me proceed:\n\n1. Create the solution and flow project\n2. Get registry definitions for the node types needed\n3. Build th
2026-04-22 23:29:40 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> ASSISTANT: Now I'll create the solution and project, then pull registry definitions in parallel.
2026-04-22 23:29:42 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> TOOL CALL: Bash | id=toolu_bdrk_01BFin8rK3shgdEaBgAYogWW | params={
  "command": "ls",
  "description": "Check working directory contents"
}
2026-04-22 23:29:42 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< TOOL RESULT [OK]: id=toolu_bdrk_01BFin8rK3shgdEaBgAYogWW | (Bash completed with no output)
2026-04-22 23:29:45 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> TOOL CALL: Bash | id=toolu_bdrk_014V1SbVsoGS2XnJVhJgiLGD | params={
  "command": "uip solution new \"TerminateParallel\" --output json",
  "description": "Create new solution named TerminateParallel"
}
2026-04-22 23:29:46 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< TOOL RESULT [OK]: id=toolu_bdrk_014V1SbVsoGS2XnJVhJgiLGD | {
  "Result": "Success",
  "Code": "SolutionNew",
  "Data": {
    "Status": "Created successfully",
    "Path": "/Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow--terminate/00/artifacts/skill-flow--terminate/TerminateParallel/TerminateParallel.uipx"
  }
}
2026-04-22 23:29:48 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> TOOL CALL: Bash | id=toolu_bdrk_01E3eX7gmVEWJbH1NwkAFexK | params={
  "command": "cd TerminateParallel && uip maestro flow init TerminateParallel --output json",
  "description": "Create flow project inside solution folder"
}
2026-04-22 23:29:50 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< TOOL RESULT [OK]: id=toolu_bdrk_01E3eX7gmVEWJbH1NwkAFexK | Tool factory already registered for project type 'Flow', skipping.
{
  "Result": "Success",
  "Code": "FlowInit",
  "Data": {
    "Status": "Created successfully",
    "Path": "/Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow--terminate/00/artifacts/skill-flow--terminate/TerminateParallel/TerminateParallel"
  }
}
2026-04-22 23:29:52 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> TOOL CALL: Bash | id=toolu_bdrk_01HLDedCaKrzHqjUEms6m8cY | params={
  "command": "uip solution project add \\\n  TerminateParallel/TerminateParallel \\\n  TerminateParallel/TerminateParallel.uipx --output json",
  "description": "Add flow project to solution"
}
2026-04-22 23:29:54 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< TOOL RESULT [ERROR]: id=toolu_bdrk_01HLDedCaKrzHqjUEms6m8cY | Exit code 1
{
  "Result": "Failure",
  "Message": "Failed to add project to solution",
  "Instructions": "Project folder not found: /Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow--terminate/00/artifacts/skill-flow--terminate/TerminateParallel/TerminateParallel/TerminateParallel"
}
2026-04-22 23:29:56 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> TOOL CALL: Bash | id=toolu_bdrk_01Q6MgncYhyzDvpuSkcy8Jgh | params={
  "command": "ls TerminateParallel/TerminateParallel/",
  "description": "Inspect created project structure"
}
2026-04-22 23:29:56 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< TOOL RESULT [ERROR]: id=toolu_bdrk_01Q6MgncYhyzDvpuSkcy8Jgh | Exit code 1
ls: TerminateParallel/TerminateParallel/: No such file or directory
2026-04-22 23:29:58 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> TOOL CALL: Bash | id=toolu_bdrk_01V4Upvo5vJtz3LGFe5WwGcE | params={
  "command": "find TerminateParallel -type f | head -30",
  "description": "Inspect full solution directory structure"
}
2026-04-22 23:29:58 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< TOOL RESULT [OK]: id=toolu_bdrk_01V4Upvo5vJtz3LGFe5WwGcE | TerminateParallel/TerminateParallel.flow
TerminateParallel/project.uiproj
2026-04-22 23:30:01 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> ASSISTANT BLOCK (ThinkingBlock): ThinkingBlock(thinking='Interesting - the `uip maestro flow init` command placed the project files directly inside the solution folder (not in a subfolder). So the project directory IS `TerminateParal
2026-04-22 23:30:02 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> TOOL CALL: Bash | id=toolu_bdrk_014124zsE6BctBmpfZLJT57q | params={
  "command": "ls TerminateParallel/",
  "description": "List solution directory contents"
}
2026-04-22 23:30:02 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< TOOL RESULT [OK]: id=toolu_bdrk_014124zsE6BctBmpfZLJT57q | project.uiproj
TerminateParallel.flow
2026-04-22 23:30:06 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> ASSISTANT BLOCK (ThinkingBlock): ThinkingBlock(thinking='The project was created directly in the solution folder - no separate subfolder. The project files `project.uiproj` and `TerminateParallel.flow` are directly in `TerminateParal
2026-04-22 23:30:07 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> TOOL CALL: Read | id=toolu_bdrk_011okYKjsjTi6djt6fKVoAXY | params={
  "file_path": "/Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow--terminate/00/artifacts/skill-flow--terminate/TerminateParallel/TerminateParallel.flow"
}
2026-04-22 23:30:09 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> TOOL CALL: Bash | id=toolu_bdrk_01GxVcAdJUQeXMDq8PmLMiv4 | params={
  "command": "uip maestro flow registry get core.trigger.manual --output json 2>/dev/null\necho \"---SEPARATOR---\"\nuip maestro flow registry get core.logic.terminate --output json 2>/dev/null\necho \"---SEPARATOR---\"\nuip maestro flow registry get core.logic.delay --output json 2>/dev/null\necho \"---SEPARATOR---\"\nuip maestro flow registry get core.control.end --output json 2>/dev/null",
  "description": "Get registry definitions for all node types"
}
2026-04-22 23:30:09 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< TOOL RESULT [ERROR]: id=toolu_bdrk_011okYKjsjTi6djt6fKVoAXY | File does not exist. Note: your current working directory is /Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow--terminate/00/artifacts/skill-flow--terminate/TerminateParallel. Did you mean TerminateParallel?
2026-04-22 23:30:16 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< TOOL RESULT [OK]: id=toolu_bdrk_01GxVcAdJUQeXMDq8PmLMiv4 | {
  "Result": "Success",
  "Code": "NodeGetSuccess",
  "Data": {
    "Node": {
      "nodeType": "core.trigger.manual",
      "version": "1.0.0",
      "category": "trigger",
      "description": "Start workflow manually",
      "tags": [
        "trigger",
        "start",
        "manual"
      ],
      "sortOrder": 40,
      "display": {
        "label": "Manual trigger",
        "icon": "play",
        "shape": "circle",
        "iconBackground": "linear-gradient(225deg, #FAFAFB 0%, #ECEDEF 100%)",
        "iconBackgroundDark": "linear-gradient(225deg, #526069 0%, rgba(50, 60, 66, 0.6) 100%)"
      },
      "handleConfiguration": [
        {
          "position": "right",
          "handles": [
            {
              "id": "output",
              "type": "source",
              "h…(848 more chars)
2026-04-22 23:30:26 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> ASSISTANT BLOCK (ThinkingBlock): ThinkingBlock(thinking='Good, I have all the registry definitions. Now let me read the current flow file (it\'s in the TerminateParallel directory).\n\nThe project was created directly in the solution
2026-04-22 23:30:27 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> TOOL CALL: Read | id=toolu_bdrk_01Bd34kDGzqcLDdNaLPPi4ni | params={
  "file_path": "/Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow--terminate/00/artifacts/skill-flow--terminate/TerminateParallel/TerminateParallel.flow"
}
2026-04-22 23:30:27 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< TOOL RESULT [ERROR]: id=toolu_bdrk_01Bd34kDGzqcLDdNaLPPi4ni | File does not exist. Note: your current working directory is /Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow--terminate/00/artifacts/skill-flow--terminate/TerminateParallel. Did you mean TerminateParallel?
2026-04-22 23:30:29 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> TOOL CALL: Read | id=toolu_bdrk_01GTREBfh4jhNKMgB2YTW9q3 | params={
  "file_path": "/Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow--terminate/00/artifacts/skill-flow--terminate/TerminateParallel/TerminateParallel/TerminateParallel.flow"
}
2026-04-22 23:30:29 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< TOOL RESULT [OK]: id=toolu_bdrk_01GTREBfh4jhNKMgB2YTW9q3 |      1→{
     2→  "id": "41bf8423-561d-4e63-9814-bd67f690bbe7",
     3→  "version": "1.0.0",
     4→  "name": "TerminateParallel",
     5→  "nodes": [
     6→    {
     7→      "id": "start",
     8→      "type": "core.trigger.manual",
     9→      "typeVersion": "1.0.0",
    10→      "display": {
    11→        "label": "Manual trigger"
    12→      },
    13→      "inputs": {},
    14→      "outputs": {
    15→        "output": {
    16→          "type": "object",
    17→          "description": "Data passed when manually triggering the workflow.",
    18→          "source": "null",
    19→          "var": "output"
    20→        }
    21→      },
    22→      "model": {
    23→        "type": "bpmn:StartEvent",
    24→        "entryPointId": "1d62792c-6f0c-48c0-b4ff-c60dacdda37f",
    2…(2850 more chars)
2026-04-22 23:30:40 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> ASSISTANT BLOCK (ThinkingBlock): ThinkingBlock(thinking='Now I have the current flow file and the registry definitions. Let me build the complete flow JSON.\n\n**Flow design:**\n- `start` (trigger) - at x:256, y:144\n- Branch A: `ter
2026-04-22 23:30:40 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> ASSISTANT: Now I have everything I need. Let me write the complete flow JSON with all nodes, edges, definitions, and layout:
2026-04-22 23:31:17 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> TOOL CALL: Write | id=toolu_bdrk_014ksvHwe1ADafPKFd7fpGcZ | params={
  "file_path": "/Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow--terminate/00/artifacts/skill-flow--terminate/TerminateParallel/TerminateParallel/TerminateParallel.flow",
  "content": "{\n  \"id\": \"41bf8423-561d-4e63-9814-bd67f690bbe7\",\n  \"version\": \"1.0.0\",\n  \"name\": \"TerminateParallel\",\n  \"nodes\": [\n    {\n      \"id\": \"start\",\n      \"type\": \"core.trigger.manual\",\n      \"typeVersion\": \"1.0.0\",\n      \"display\": {\n        \"label\": \"Manual trigger\"\n      },\n      \"inputs\": {},\n      \"outputs\": {\n        \"output\": {\n          \"type\": \"object\",\n          \"description\": \"Data passed when manually triggering the workflow.\",\n          \"source\": \"null\",\n          \"var\": \"output\"\n        }\n      },\n  …(15811 more chars)
2026-04-22 23:31:17 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< TOOL RESULT [OK]: id=toolu_bdrk_014ksvHwe1ADafPKFd7fpGcZ | The file /Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow--terminate/00/artifacts/skill-flow--terminate/TerminateParallel/TerminateParallel/TerminateParallel.flow has been updated successfully.
2026-04-22 23:31:20 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> ASSISTANT: Now validate the flow:
2026-04-22 23:31:21 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> TOOL CALL: Bash | id=toolu_bdrk_01DzVwWNiQNLtMr68gAmbJdC | params={
  "command": "cd TerminateParallel/TerminateParallel && uip maestro flow validate TerminateParallel.flow --output json",
  "description": "Validate the TerminateParallel flow"
}
2026-04-22 23:31:21 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< TOOL RESULT [ERROR]: id=toolu_bdrk_01DzVwWNiQNLtMr68gAmbJdC | Exit code 1
(eval):cd:1: no such file or directory: TerminateParallel/TerminateParallel
2026-04-22 23:31:24 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> TOOL CALL: Bash | id=toolu_bdrk_01W9ag1y9z5zj9FhEZwpxL3x | params={
  "command": "uip maestro flow validate TerminateParallel.flow --output json",
  "description": "Validate the flow from correct path"
}
2026-04-22 23:31:25 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< TOOL RESULT [ERROR]: id=toolu_bdrk_01W9ag1y9z5zj9FhEZwpxL3x | Exit code 1
Tool factory already registered for project type 'Flow', skipping.
{
  "Result": "Failure",
  "Message": "Flow validation failed",
  "Instructions": "File not found: /Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow--terminate/00/artifacts/skill-flow--terminate/TerminateParallel/TerminateParallel.flow"
}
[ERROR] Stack trace:
[ERROR] Error: File not found: /Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow--terminate/00/artifacts/skill-flow--terminate/TerminateParallel/TerminateParallel.flow
    at FlowValidateService.validateFile (file:///Users/religa/src/cli/packages/maestro-tool/dist/tool.js:506591:13)
    at async FlowValidateService.execute (file:///Users/religa/src/cli/packages/maestro-tool/dist/tool.js:506549:32)
    at async f…(626 more chars)
2026-04-22 23:31:28 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> ASSISTANT BLOCK (ThinkingBlock): ThinkingBlock(thinking='The current working directory is at the TerminateParallel solution folder - but the flow was written to a subdirectory. Let me check where we actually are.', signature='EsYCCkg
2026-04-22 23:31:29 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> TOOL CALL: Bash | id=toolu_bdrk_01W8Nzvwd5Zt8bsDgfkXCyb6 | params={
  "command": "pwd && find . -name \"*.flow\" 2>/dev/null",
  "description": "Check current directory and find flow files"
}
2026-04-22 23:31:29 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< TOOL RESULT [OK]: id=toolu_bdrk_01W8Nzvwd5Zt8bsDgfkXCyb6 | /Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow--terminate/00/artifacts/skill-flow--terminate/TerminateParallel
./TerminateParallel/TerminateParallel.flow
2026-04-22 23:31:32 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> TOOL CALL: Bash | id=toolu_bdrk_01W5oDzqM3j7U1xjeP3VvWEk | params={
  "command": "uip maestro flow validate TerminateParallel/TerminateParallel.flow --output json",
  "description": "Validate the flow with correct relative path"
}
2026-04-22 23:31:33 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< TOOL RESULT [OK]: id=toolu_bdrk_01W5oDzqM3j7U1xjeP3VvWEk | Tool factory already registered for project type 'Flow', skipping.
{
  "Result": "Success",
  "Code": "FlowValidate",
  "Data": {
    "File": "/Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow--terminate/00/artifacts/skill-flow--terminate/TerminateParallel/TerminateParallel/TerminateParallel.flow",
    "Status": "Valid",
    "Warnings": "1 warning(s):\n  - [nodes[terminateNode].outputs.message.source] [MISSING_OUTPUT_MAPPING] \"Terminate Workflow\" is missing output mapping for \"message\""
  }
}
2026-04-22 23:31:53 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> ASSISTANT BLOCK (ThinkingBlock): ThinkingBlock(thinking='The flow validates successfully with only 1 warning: the terminate node is missing output mapping for "message". This is expected behavior - the Terminate node by design does N
2026-04-22 23:31:53 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> ASSISTANT: Validation passes (Success) with one expected warning — the Terminate node cannot produce output mappings by design (it aborts the whole flow). Now run tidy to auto-layout:
2026-04-22 23:31:53 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> TOOL CALL: Bash | id=toolu_bdrk_01X1gZMtbun4AhzqKM4QkfGf | params={
  "command": "uip maestro flow tidy TerminateParallel/TerminateParallel.flow --output json",
  "description": "Auto-layout the flow nodes"
}
2026-04-22 23:31:55 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< TOOL RESULT [OK]: id=toolu_bdrk_01X1gZMtbun4AhzqKM4QkfGf | Tool factory already registered for project type 'Flow', skipping.
{
  "Result": "Success",
  "Code": "FlowTidy",
  "Data": {
    "File": "TerminateParallel/TerminateParallel.flow",
    "NodesTotal": 4,
    "EdgesTotal": 3,
    "NodesRepositioned": 3
  },
  "Instructions": "Repositioned 3 of 4 nodes"
}
2026-04-22 23:32:04 [DEBUG] coder_eval.agents.claude_code_agent: [coder] >>> ASSISTANT: The flow is built, validated, and tidied. Here's a summary:

---

## TerminateParallel — Build Complete

**File:** `TerminateParallel/TerminateParallel/TerminateParallel.flow`

### Nodes Built
| Node | Type | Purpose |
|------|------|---------|
| `start` | `core.trigger.manual` | Entry point — fires both branches simultaneously |
| `terminateNode` | `core.logic.terminate` | Branch A — immediately terminates the entire workflow |
| `delayNode` | `core.logic.delay` | Branch B — waits 10 seconds (`
2026-04-22 23:32:04 [DEBUG] coder_eval.agents.claude_code_agent: [coder] <<< RESULT: cost=$0.5851696500000001, usage={'input_tokens': 2133, 'cache_creation_input_tokens': 42281, 'cache_read_input_tokens': 904823, 'output_tokens': 9918, 'server_tool_use': {'web_search_requests': 0, 'web_fetch_requests': 0}, 'service_
2026-04-22 23:32:04 [DEBUG] coder_eval.agents.claude_code_agent: [coder] session_id changed: None -> b68daadb-ad4d-4ef1-ae38-e20f9df2338b
2026-04-22 23:32:04 [DEBUG] coder_eval.agents.claude_code_agent: [coder] Agent query stream ended
2026-04-22 23:32:04 [DEBUG] coder_eval.orchestrator: Agent response received (3072 chars)
2026-04-22 23:32:04 [DEBUG] coder_eval.orchestrator: Checking success criteria
2026-04-22 23:32:04 [DEBUG] coder_eval.criteria.run_command: Running command for criterion 'uip maestro flow validate passes on the flow file': uip maestro flow validate TerminateParallel/TerminateParallel/TerminateParallel.flow
2026-04-22 23:32:06 [DEBUG] coder_eval.sandbox: Command 'uip maestro flow validate TerminateParallel/TerminateParallel/TerminateParallel.flow' exited with code 0
2026-04-22 23:32:06 [DEBUG] coder_eval.sandbox: STDOUT:
---
{
  "Result": "Success",
  "Code": "FlowValidate",
  "Data": {
    "File": "/Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow--terminate/00/artifacts/skill-flow--terminate/TerminateParallel/TerminateParallel/TerminateParallel.flow",
    "Status": "Valid",
    "Warnings": "1 warning(s):\n  - [nodes[terminateNode].outputs.message.source] [MISSING_OUTPUT_MAPPING] \"Terminate Workflow\" is missing output mapping for \"message\""
  }
}
---
2026-04-22 23:32:06 [DEBUG] coder_eval.sandbox: STDERR:
---
Tool factory already registered for project type 'Flow', skipping.
---
2026-04-22 23:32:06 [INFO] coder_eval.evaluation.checker: Criterion 'run_command' score: 1.00
2026-04-22 23:32:06 [DEBUG] coder_eval.criteria.run_command: Running command for criterion 'Flow has Terminate + Delay nodes in parallel, terminates before delay completes': python3 $TASK_DIR/check_terminate_flow.py
2026-04-22 23:32:08 [DEBUG] coder_eval.sandbox: Command 'python3 $TASK_DIR/check_terminate_flow.py' exited with code 1
2026-04-22 23:32:08 [DEBUG] coder_eval.sandbox: STDOUT:
---
OK: Parallel branches from trigger verified
---
2026-04-22 23:32:08 [DEBUG] coder_eval.sandbox: STDERR:
---
FAIL: flow debug exit 1
stdout: {
  "Result": "Failure",
  "Message": "Import failed (400): {\"code\":\"20001\",\"message\":\"The solution archive does not contain any valid projects.\",\"translatedMessage\":null}",
  "Instructions": "Import failed (400): {\"code\":\"20001\",\"message\":\"The solution archive does not contain any valid projects.\",\"translatedMessage\":null}"
}

stderr: Tool factory already registered for project type 'Flow', skipping.
---
2026-04-22 23:32:08 [INFO] coder_eval.evaluation.checker: Criterion 'run_command' score: 0.00
2026-04-22 23:32:08 [INFO] coder_eval.orchestrator: Success criteria: 1/2 passed, weighted score: 0.375
2026-04-22 23:32:08 [DEBUG] coder_eval.orchestrator: Tool calls for iteration 1:
  1. [success] Skill → Launching skill: uipath:uipath-maestro-flow
  2. [success] Bash `UIP=$(command -v uip 2>/dev/null || echo "$(npm root -g 2>/dev/null | sed 's|/node_modules$||')/bin/uip")
CURRENT=$($UIP` → UIP binary: /Users/religa/src/coder_eval/.venv/bin/uip
Version: 0.3.4
Using: uip
  3. [success] Read /Users/religa/src/skills/skills/uipath-maestro-flow/references/flow-file-format.md →      1→# UiPath Flow File Format
     2→
     3→The `.flow` file is a JSON docum
  4. [success] Read /Users/religa/src/skills/skills/uipath-maestro-flow/references/plugins/terminate/impl.md →      1→# Terminate Node — Implementation
     2→
     3→## Node Type
     4→
   
  5. [success] Read /Users/religa/src/skills/skills/uipath-maestro-flow/references/plugins/delay/impl.md →      1→# Delay Node — Implementation
     2→
     3→## Node Type
     4→
     5→
  6. [success] Read /Users/religa/src/skills/skills/uipath-maestro-flow/references/plugins/end/impl.md →      1→# End Node — Implementation
     2→
     3→## Node Type
     4→
     5→`c
  7. [success] Bash `ls` → (Bash completed with no output)
  8. [success] Bash `uip solution new "TerminateParallel" --output json` → {
  "Result": "Success",
  "Code": "SolutionNew",
  "Data": {
    "Status": "Cre
  9. [success] Bash `cd TerminateParallel && uip maestro flow init TerminateParallel --output json` → Tool factory already registered for project type 'Flow', skipping.
{
  "Result":
  10. [error] Bash `uip solution project add \
  TerminateParallel/TerminateParallel \
  TerminateParallel/TerminateParallel.uipx --output j` → Exit code 1
{
  "Result": "Failure",
  "Message": "Failed to add project to solu
  11. [error] Bash `ls TerminateParallel/TerminateParallel/` → Exit code 1
ls: TerminateParallel/TerminateParallel/: No such file or directory
  12. [success] Bash `find TerminateParallel -type f | head -30` → TerminateParallel/TerminateParallel.flow
TerminateParallel/project.uiproj
  13. [success] Bash `ls TerminateParallel/` → project.uiproj
TerminateParallel.flow
  14. [error] Read /Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow--terminate/00/artifacts/skill-flow--terminate/TerminateParallel/TerminateParallel.flow → File does not exist. Note: your current working directory is /Users/religa/src/c
  15. [success] Bash `uip maestro flow registry get core.trigger.manual --output json 2>/dev/null
echo "---SEPARATOR---"
uip maestro flow regi` → {
  "Result": "Success",
  "Code": "NodeGetSuccess",
  "Data": {
    "Node": {
 
  16. [error] Read /Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow--terminate/00/artifacts/skill-flow--terminate/TerminateParallel/TerminateParallel.flow → File does not exist. Note: your current working directory is /Users/religa/src/c
  17. [success] Read /Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow--terminate/00/artifacts/skill-flow--terminate/TerminateParallel/TerminateParallel/TerminateParallel.flow →      1→{
     2→  "id": "41bf8423-561d-4e63-9814-bd67f690bbe7",
     3→  "versio
  18. [success] Write /Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow--terminate/00/artifacts/skill-flow--terminate/TerminateParallel/TerminateParallel/TerminateParallel.flow → The file /Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flo
  19. [error] Bash `cd TerminateParallel/TerminateParallel && uip maestro flow validate TerminateParallel.flow --output json` → Exit code 1
(eval):cd:1: no such file or directory: TerminateParallel/TerminateP
  20. [error] Bash `uip maestro flow validate TerminateParallel.flow --output json` → Exit code 1
Tool factory already registered for project type 'Flow', skipping.
{
  21. [success] Bash `pwd && find . -name "*.flow" 2>/dev/null` → /Users/religa/src/coder_eval/runs/2026-04-22_20-39-58/default/skill-flow--termin
  22. [success] Bash `uip maestro flow validate TerminateParallel/TerminateParallel.flow --output json` → Tool factory already registered for project type 'Flow', skipping.
{
  "Result":
  23. [success] Bash `uip maestro flow tidy TerminateParallel/TerminateParallel.flow --output json` → Tool factory already registered for project type 'Flow', skipping.
{
  "Result":
2026-04-22 23:32:08 [INFO] coder_eval.orchestrator: Running post-run command: python3 $SKILLS_REPO_PATH/tests/tasks/uipath-maestro-flow/_shared/cleanup_solutions.py
2026-04-22 23:32:10 [WARNING] coder_eval.orchestrator: [post_run stderr] cleanup_solutions: failed to delete 7b3661c6-2e3d-4add-86ff-974e786fd985 (exit 1):
2026-04-22 23:32:10 [WARNING] coder_eval.orchestrator: [post_run stderr] cleanup_solutions: summary policy=always deleted=0 preserved=0 skipped=0 failed=1
2026-04-22 23:32:10 [INFO] coder_eval.orchestrator: Sandbox preserved (in-place): runs/2026-04-22_20-39-58/default/skill-flow--terminate/00/artifacts/skill-flow--terminate