UiPathFlow Evalboard
ADX dashboard↗

Terminate

Passed
skill-flow--terminate · run 2026-04-21_21-02-20
Score
1.00
Duration
267.2s
Cost
—
Final status
SUCCESS
Tool calls
27
uipath-maestro-flowe2egenerateootb

Prompt

Create a UiPath Flow project named "TerminateParallel" with two parallel
branches from the trigger:

- Branch A: immediately terminates the entire workflow.
- Branch B: waits 10 seconds, then ends and outputs the message "done".

Both branches should start at the same time from the trigger node.

Do NOT run flow debug — just validate the flow.
Do NOT ask for approval, confirmation, or feedback. Do NOT pause between planning and implementation. Build the complete flow end-to-end in a single pass.
Before starting, load the uipath-maestro-flow skill. Read and follow its workflow steps exactly.

Success criteria (2)

PASSuip flow validate passes on the flow filescore 1
Command: uip flow validate TerminateParallel/TerminateParallel/TerminateParallel.flow
Exit code: 0 (expected: 0)
Stdout:
{
  "Result": "Success",
  "Code": "FlowValidate",
  "Data": {
    "File": "/Users/religa/src/coder_eval/runs/2026-04-21_21-02-20/default/skill-flow--terminate/artifacts/skill-flow--terminate/TerminateParallel/TerminateParallel/TerminateParallel.flow",
    "Status": "Valid",
    "Warnings": "1 warning(s):\n  - [nodes[terminateA].outputs.message.source] [MISSING_OUTPUT_MAPPING] \"Terminate (Branch A)\" is missing output mapping for \"message\""
  }
}

Stderr:
Tool factory already registered for project type 'Flow', skipping.
PASSFlow has Terminate + Delay nodes in parallel, terminates before delay completesscore 1
Command: python3 $TASK_DIR/check_terminate_flow.py
Exit code: 0 (expected: 0)
Stdout:
OK: Parallel branches from trigger verified
OK: Terminate + Delay nodes present; 1 element(s) terminated

Stderr: (empty)

Command timeline (27)

agent tool calls in order
  1. 1.Skilluipath:uipath-maestro-flow
  2. 2.BashCheck if uip is available
  3. 3.Read/Users/religa/src/skills/skills/uipath-maestro-flow/references/flow-file-format.md
  4. 4.Read/Users/religa/src/skills/skills/uipath-maestro-flow/references/plugins/terminate/impl.md
  5. 5.Read/Users/religa/src/skills/skills/uipath-maestro-flow/references/plugins/delay/impl.md
  6. 6.Read/Users/religa/src/skills/skills/uipath-maestro-flow/references/plugins/end/impl.md
  7. 7.Read/Users/religa/src/skills/skills/uipath-maestro-flow/references/planning-arch.md
  8. 8.Read/Users/religa/src/skills/skills/uipath-maestro-flow/references/variables-and-expressions.md
  9. 9.Read/Users/religa/src/skills/skills/uipath-maestro-flow/references/planning-arch.md
  10. 10.Read/Users/religa/src/skills/skills/uipath-maestro-flow/references/plugins/merge/impl.md
  11. 11.Read/Users/religa/src/skills/skills/uipath-maestro-flow/references/planning-arch.md
  12. 12.BashCheck current working directory contents
  13. 13.BashCheck for existing .uipx solutions
  14. 14.BashCreate new TerminateParallel solution
  15. 15.BashInitialize TerminateParallel flow project
  16. 16.BashAdd TerminateParallel project to solution
  17. 17.BashRefresh registry cache
  18. 18.BashGet trigger.manual node definition
  19. 19.BashGet terminate node definition
  20. 20.BashGet delay node definition
  21. 21.BashGet end node definition
  22. 22.BashRead the scaffolded flow file
  23. 23.Write/Users/religa/src/coder_eval/runs/2026-04-21_21-02-20/default/skill-flow--terminate/artifacts/skill-flow--terminate/TerminateParallel/Ter…
  24. 24.Read/Users/religa/src/coder_eval/runs/2026-04-21_21-02-20/default/skill-flow--terminate/artifacts/skill-flow--terminate/TerminateParallel/Ter…
  25. 25.Write/Users/religa/src/coder_eval/runs/2026-04-21_21-02-20/default/skill-flow--terminate/artifacts/skill-flow--terminate/TerminateParallel/Ter…
  26. 26.BashValidate the TerminateParallel flow
  27. 27.BashAuto-layout the flow nodes

Artifacts

task.log

37,740 bytes · click to view
2026-04-22 06:50:40 [DEBUG] coder_eval.criteria: Criteria already discovered, skipping
2026-04-22 06:50:40 [DEBUG] coder_eval.criteria: Validated 16 criterion checkers
2026-04-22 06:50:40 [INFO] coder_eval.orchestrator: API routing: anthropic_direct
2026-04-22 06:50:40 [INFO] coder_eval.orchestrator: Starting iteration 1/2
2026-04-22 06:50:40 [DEBUG] coder_eval.orchestrator: Sending prompt: Create a UiPath Flow project named "TerminateParallel" with two parallel
branches from the trigger:
...
2026-04-22 06:50:40 [DEBUG] coder_eval.agents.claude_code_agent: Starting agent query stream...
2026-04-22 06:50:54 [DEBUG] coder_eval.agents.claude_code_agent: --- SYSTEM (hook_started): {'type': 'system', 'subtype': 'hook_started', 'hook_id': 'cb8a82c6-655c-4b7b-8fa7-5c80a11a6b38', 'hook_name': 'SessionStart:startup', 'hook_event': 'SessionStart', 'uuid': '65c9dd0f-bac9-4e00-b498-125
2026-04-22 06:50:54 [DEBUG] coder_eval.agents.claude_code_agent: --- SYSTEM (hook_response): {'type': 'system', 'subtype': 'hook_response', 'hook_id': 'cb8a82c6-655c-4b7b-8fa7-5c80a11a6b38', 'hook_name': 'SessionStart:startup', 'hook_event': 'SessionStart', 'output': '@uipath/cli is already i
2026-04-22 06:50:54 [DEBUG] coder_eval.agents.claude_code_agent: --- SYSTEM (init): {'type': 'system', 'subtype': 'init', 'cwd': '/Users/religa/src/coder_eval/runs/2026-04-21_21-02-20/default/skill-flow--terminate/artifacts/skill-flow--terminate', 'session_id': 'fa9abb1d-7caf-4689-b1
2026-04-22 06:50:56 [DEBUG] coder_eval.agents.claude_code_agent: >>> TOOL CALL: Skill | id=toolu_01KjRkowHHhzVZU93buswHWA | params={
  "skill": "uipath:uipath-maestro-flow"
}
2026-04-22 06:50:56 [DEBUG] coder_eval.agents.claude_code_agent: <<< TOOL RESULT [OK]: id=toolu_01KjRkowHHhzVZU93buswHWA | Launching skill: uipath:uipath-maestro-flow
2026-04-22 06:50:56 [DEBUG] coder_eval.agents.claude_code_agent: --- RateLimitEvent: RateLimitEvent(rate_limit_info=RateLimitInfo(status='allowed_warning', resets_at=1776970800, rate_limit_type='seven_day', utilization=0.89, overage_status=None, overage_resets_at=None, overage_disable
2026-04-22 06:51:04 [DEBUG] coder_eval.agents.claude_code_agent: >>> ASSISTANT BLOCK (ThinkingBlock): ThinkingBlock(thinking='Let me read the necessary reference files to understand how to build this flow properly before starting implementation.\n\nThe task requires:\n- A flow named "TerminateParallel
2026-04-22 06:51:04 [DEBUG] coder_eval.agents.claude_code_agent: >>> TOOL CALL: Bash | id=toolu_015ZcQFGryG7cqpEFH3pZHWc | params={
  "command": "which uip && uip --version 2>/dev/null || echo \"uip not found on PATH\"",
  "description": "Check if uip is available"
}
2026-04-22 06:51:04 [DEBUG] coder_eval.agents.claude_code_agent: >>> TOOL CALL: Read | id=toolu_01TgyfQt8ehu7a28wyucX39y | params={
  "file_path": "/Users/religa/src/skills/skills/uipath-maestro-flow/references/flow-file-format.md"
}
2026-04-22 06:51:05 [DEBUG] coder_eval.agents.claude_code_agent: <<< TOOL RESULT [OK]: id=toolu_015ZcQFGryG7cqpEFH3pZHWc | /Users/religa/src/coder_eval/.venv/bin/uip
0.3.4
2026-04-22 06:51:05 [DEBUG] coder_eval.agents.claude_code_agent: <<< TOOL RESULT [OK]: id=toolu_01TgyfQt8ehu7a28wyucX39y |      1→# UiPath Flow File Format
     2→
     3→The `.flow` file is a JSON document at `<ProjectName>.flow` in the project root. It is the **only file you should edit** — other generated files will be overwritten.
     4→
     5→## Top-level structure
     6→
     7→```json
     8→{
     9→  "id": "<uuid>",
    10→  "version": "1.0.0",
    11→  "name": "MyFlow",
    12→  "nodes": [],
    13→  "edges": [],
    14→  "definitions": [],
    15→  "bindings": [],
    16→  "variables": {},
    17→  "layout": {
    18→    "nodes": {}
    19→  }
    20→}
    21→```
    22→
    23→`solutionId` and `projectId` may also appear at the top level — these are auto-populated by `uip flow init` and packaging. Do not add them manually.
    24→
    25→> **`bindings[]`** holds Orchestrator resource references …(20118 more chars)
2026-04-22 06:51:08 [DEBUG] coder_eval.agents.claude_code_agent: >>> ASSISTANT BLOCK (ThinkingBlock): ThinkingBlock(thinking='Now let me read the terminate, delay, and end node plugin references, along with the planning-arch.md to understand parallel branches.', signature='EsQCClsIDBgCKkCi3qz+GV3tsxRW
2026-04-22 06:51:09 [DEBUG] coder_eval.agents.claude_code_agent: >>> TOOL CALL: Read | id=toolu_01GZAfK7G1rsCTom2oXGU5DW | params={
  "file_path": "/Users/religa/src/skills/skills/uipath-maestro-flow/references/plugins/terminate/impl.md"
}
2026-04-22 06:51:10 [DEBUG] coder_eval.agents.claude_code_agent: <<< TOOL RESULT [OK]: id=toolu_01GZAfK7G1rsCTom2oXGU5DW |      1→# Terminate Node — Implementation
     2→
     3→## Node Type
     4→
     5→`core.logic.terminate`
     6→
     7→## Registry Validation
     8→
     9→```bash
    10→uip flow registry get core.logic.terminate --output json
    11→```
    12→
    13→Confirm: input port `input`, no output ports.
    14→
    15→## JSON Structure
    16→
    17→```json
    18→{
    19→  "id": "abortOnError",
    20→  "type": "core.logic.terminate",
    21→  "typeVersion": "1.0.0",
    22→  "display": { "label": "Abort" },
    23→  "inputs": {},
    24→  "model": { "type": "bpmn:EndEvent" }
    25→}
    26→```
    27→
    28→## Adding / Editing
    29→
    30→For step-by-step add, delete, and wiring procedures, see [flow-editing-operations.md](../../flow-editing-operations.md). Use the JSON structure a…(1147 more chars)
2026-04-22 06:51:10 [DEBUG] coder_eval.agents.claude_code_agent: >>> TOOL CALL: Read | id=toolu_01KTetiCht1FetnMrai8qNX3 | params={
  "file_path": "/Users/religa/src/skills/skills/uipath-maestro-flow/references/plugins/delay/impl.md"
}
2026-04-22 06:51:10 [DEBUG] coder_eval.agents.claude_code_agent: <<< TOOL RESULT [OK]: id=toolu_01KTetiCht1FetnMrai8qNX3 |      1→# Delay Node — Implementation
     2→
     3→## Node Type
     4→
     5→`core.logic.delay`
     6→
     7→## Registry Validation
     8→
     9→```bash
    10→uip flow registry get core.logic.delay --output json
    11→```
    12→
    13→Confirm: input port `input`, output port `output`, required inputs `timerType` and `timerPreset`.
    14→
    15→## JSON Structure
    16→
    17→### Duration-Based (Preset)
    18→
    19→```json
    20→{
    21→  "id": "wait15min",
    22→  "type": "core.logic.delay",
    23→  "typeVersion": "1.0.0",
    24→  "display": { "label": "Wait 15 Minutes" },
    25→  "inputs": {
    26→    "timerType": "timeDuration",
    27→    "timerPreset": "PT15M"
    28→  },
    29→  "model": {
    30→    "type": "bpmn:IntermediateCatchEvent",
    31→    "eventDefi…(2349 more chars)
2026-04-22 06:51:10 [DEBUG] coder_eval.agents.claude_code_agent: >>> TOOL CALL: Read | id=toolu_01NY4MLnxFpFqP6k53WvrC2j | params={
  "file_path": "/Users/religa/src/skills/skills/uipath-maestro-flow/references/plugins/end/impl.md"
}
2026-04-22 06:51:10 [DEBUG] coder_eval.agents.claude_code_agent: <<< TOOL RESULT [OK]: id=toolu_01NY4MLnxFpFqP6k53WvrC2j |      1→# End Node — Implementation
     2→
     3→## Node Type
     4→
     5→`core.control.end`
     6→
     7→## Registry Validation
     8→
     9→```bash
    10→uip flow registry get core.control.end --output json
    11→```
    12→
    13→Confirm: input port `input`, no output ports.
    14→
    15→## JSON Structure
    16→
    17→### Without Output Mapping
    18→
    19→```json
    20→{
    21→  "id": "doneSuccess",
    22→  "type": "core.control.end",
    23→  "typeVersion": "1.0.0",
    24→  "display": { "label": "Done" },
    25→  "inputs": {},
    26→  "model": { "type": "bpmn:EndEvent" }
    27→}
    28→```
    29→
    30→### With Output Mapping
    31→
    32→When the workflow declares `out` variables, every End node must map all of them:
    33→
    34→```json
    35→{
    36…(1887 more chars)
2026-04-22 06:51:10 [DEBUG] coder_eval.agents.claude_code_agent: --- RateLimitEvent: RateLimitEvent(rate_limit_info=RateLimitInfo(status='allowed_warning', resets_at=1776970800, rate_limit_type='seven_day', utilization=0.9, overage_status=None, overage_resets_at=None, overage_disabled
2026-04-22 06:51:14 [DEBUG] coder_eval.agents.claude_code_agent: >>> ASSISTANT BLOCK (ThinkingBlock): ThinkingBlock(thinking='Now let me check the planning-arch.md to understand how to wire parallel branches and what nodes are needed for parallel execution. I need to understand if a "split" node or ju
2026-04-22 06:51:14 [DEBUG] coder_eval.agents.claude_code_agent: >>> TOOL CALL: Read | id=toolu_019V7NF2SKRHgBGeRupa9PEv | params={
  "file_path": "/Users/religa/src/skills/skills/uipath-maestro-flow/references/planning-arch.md",
  "limit": 100
}
2026-04-22 06:51:15 [DEBUG] coder_eval.agents.claude_code_agent: <<< TOOL RESULT [OK]: id=toolu_019V7NF2SKRHgBGeRupa9PEv |      1→# Planning Phase 1: Discovery & Architectural Design
     2→
     3→Discover available capabilities, then design the flow topology — select node types, define edges, and identify expected inputs and outputs. This phase produces a **mermaid diagram** and structured tables that can be reviewed before any implementation work begins.
     4→
     5→> **Registry rules for this phase:**
     6→> - **`registry search` and `registry list` are ALLOWED** — use them to discover what connectors, resources, and operations exist before committing to a topology.
     7→> - **`registry get` is NOT allowed** — detailed metadata, connection binding, and reference field resolution are handled in [Planning Phase 2: Implementation](planning-impl.md).
     8→
     9→---
    10→
    11→## Process
    12→
…(7729 more chars)
2026-04-22 06:51:15 [DEBUG] coder_eval.agents.claude_code_agent: >>> TOOL CALL: Read | id=toolu_01B9Lanjn7eMyGLRBVHpu4Ts | params={
  "file_path": "/Users/religa/src/skills/skills/uipath-maestro-flow/references/variables-and-expressions.md",
  "limit": 80
}
2026-04-22 06:51:15 [DEBUG] coder_eval.agents.claude_code_agent: <<< TOOL RESULT [OK]: id=toolu_01B9Lanjn7eMyGLRBVHpu4Ts |      1→# Variables and Expressions
     2→
     3→Complete reference for declaring variables, writing expressions, and managing data flow in `.flow` files.
     4→
     5→> **Read this before** adding variables or writing expressions in any flow. Incorrect variable declarations cause silent runtime failures that `flow validate` does not catch.
     6→
     7→---
     8→
     9→## Variables Overview
    10→
    11→Every flow has a `variables` object at the top level of the `.flow` file. It contains three sections:
    12→
    13→```json
    14→{
    15→  "variables": {
    16→    "globals": [],
    17→    "nodes": [],
    18→    "variableUpdates": {}
    19→  }
    20→}
    21→```
    22→
    23→| Section | Purpose |
    24→| --- | --- |
    25→| `globals` | Workflow-level variables: inputs…(2409 more chars)
2026-04-22 06:51:30 [DEBUG] coder_eval.agents.claude_code_agent: >>> ASSISTANT BLOCK (ThinkingBlock): ThinkingBlock(thinking='Now I need to understand how parallel branches work. The trigger can have multiple outgoing edges - one to each branch. Let me look at the planning-arch.md for more context on 
2026-04-22 06:51:30 [DEBUG] coder_eval.agents.claude_code_agent: >>> TOOL CALL: Read | id=toolu_013xd17F5QFVgnaNQbtKaZMv | params={
  "file_path": "/Users/religa/src/skills/skills/uipath-maestro-flow/references/planning-arch.md",
  "limit": 100,
  "offset": 100
}
2026-04-22 06:51:30 [DEBUG] coder_eval.agents.claude_code_agent: <<< TOOL RESULT [OK]: id=toolu_013xd17F5QFVgnaNQbtKaZMv |    100→
   101→### Control Flow
   102→
   103→| Node Type | Plugin | When to Select |
   104→| --- | --- | --- |
   105→| `core.logic.decision` | [decision](plugins/decision/planning.md) | Binary branching (if/else) based on a boolean condition |
   106→| `core.logic.switch` | [switch](plugins/switch/planning.md) | Multi-way branching (3+ paths) based on ordered case expressions |
   107→| `core.logic.loop` | [loop](plugins/loop/planning.md) | Iterate over a collection of items |
   108→| `core.logic.merge` | [merge](plugins/merge/planning.md) | Synchronize parallel branches before continuing |
   109→| `core.control.end` | [end](plugins/end/planning.md) | Graceful flow completion (one per terminal path) |
   110→| `core.logic.terminate` | [terminate](plugins/terminate/planning.md) | Abor…(6470 more chars)
2026-04-22 06:51:31 [DEBUG] coder_eval.agents.claude_code_agent: >>> TOOL CALL: Read | id=toolu_011Nym8AXpyLkVVeLn6XLPdN | params={
  "file_path": "/Users/religa/src/skills/skills/uipath-maestro-flow/references/plugins/merge/impl.md"
}
2026-04-22 06:51:31 [DEBUG] coder_eval.agents.claude_code_agent: <<< TOOL RESULT [OK]: id=toolu_011Nym8AXpyLkVVeLn6XLPdN |      1→# Merge Node — Implementation
     2→
     3→## Node Type
     4→
     5→`core.logic.merge`
     6→
     7→## Registry Validation
     8→
     9→```bash
    10→uip flow registry get core.logic.merge --output json
    11→```
    12→
    13→Confirm: input port `input` (accepts multiple connections), output port `output`.
    14→
    15→## JSON Structure
    16→
    17→```json
    18→{
    19→  "id": "joinBranches",
    20→  "type": "core.logic.merge",
    21→  "typeVersion": "1.0.0",
    22→  "display": { "label": "Join Branches" },
    23→  "inputs": {},
    24→  "model": { "type": "bpmn:ParallelGateway" }
    25→}
    26→```
    27→
    28→## Adding / Editing
    29→
    30→For step-by-step add, delete, and wiring procedures, see [flow-editing-operations.md](../../flow-editing-opera…(1133 more chars)
2026-04-22 06:51:41 [DEBUG] coder_eval.agents.claude_code_agent: >>> ASSISTANT BLOCK (ThinkingBlock): ThinkingBlock(thinking='Now I have a good understanding of the flow file format. Let me understand the parallel branches:\n\nFor parallel branches from a trigger, I can connect the trigger\'s `output`
2026-04-22 06:51:41 [DEBUG] coder_eval.agents.claude_code_agent: >>> TOOL CALL: Read | id=toolu_01H75iPCBPujbzSrEsYQVWDf | params={
  "file_path": "/Users/religa/src/skills/skills/uipath-maestro-flow/references/planning-arch.md",
  "limit": 80,
  "offset": 200
}
2026-04-22 06:51:41 [DEBUG] coder_eval.agents.claude_code_agent: <<< TOOL RESULT [OK]: id=toolu_01H75iPCBPujbzSrEsYQVWDf |    200→
   201→## Wiring Rules
   202→
   203→Apply these when defining edges in the topology:
   204→
   205→1. Edges connect a **source port** (output) on one node to a **target port** (input) on another
   206→2. Trigger nodes have no input port — they are always edge sources, never targets
   207→3. End/Terminate nodes have no output port — they are always edge targets, never sources
   208→4. Every non-trigger node must have at least one incoming edge
   209→5. Every non-terminal node must have at least one outgoing edge
   210→6. Decision nodes produce exactly two outgoing edges: one from `true`, one from `false`
   211→7. Switch nodes produce one outgoing edge per case + optionally one from `default`
   212→8. Loop nodes: the `loopBack` port receives the edge returning from the last…(3824 more chars)
2026-04-22 06:51:58 [DEBUG] coder_eval.agents.claude_code_agent: >>> ASSISTANT BLOCK (ThinkingBlock): ThinkingBlock(thinking='Now I understand the parallel execution pattern. From the pattern shown:\n\n```\nTrigger -> Prepare\n  |-- Call API A --+\n  |-- Call API B --+\n                   +-- Merge ->
2026-04-22 06:51:58 [DEBUG] coder_eval.agents.claude_code_agent: >>> ASSISTANT: Now let me check the current directory and get the registry definitions for all needed node types:
2026-04-22 06:51:58 [DEBUG] coder_eval.agents.claude_code_agent: >>> TOOL CALL: Bash | id=toolu_01AGeiCtfAiKJKSXzdfukr21 | params={
  "command": "ls /Users/religa/src/coder_eval/runs/2026-04-21_21-02-20/default/skill-flow--terminate/artifacts/skill-flow--terminate/",
  "description": "Check current working directory contents"
}
2026-04-22 06:51:59 [DEBUG] coder_eval.agents.claude_code_agent: <<< TOOL RESULT [OK]: id=toolu_01AGeiCtfAiKJKSXzdfukr21 | (Bash completed with no output)
2026-04-22 06:51:59 [DEBUG] coder_eval.agents.claude_code_agent: >>> TOOL CALL: Bash | id=toolu_01K45qaUJdYDKmHiKA5aecKE | params={
  "command": "ls /Users/religa/src/coder_eval/runs/2026-04-21_21-02-20/default/skill-flow--terminate/artifacts/skill-flow--terminate/ && find /Users/religa/src/coder_eval/runs/2026-04-21_21-02-20/default/skill-flow--terminate/artifacts/skill-flow--terminate/ -name \"*.uipx\" 2>/dev/null",
  "description": "Check for existing .uipx solutions"
}
2026-04-22 06:51:59 [DEBUG] coder_eval.agents.claude_code_agent: <<< TOOL RESULT [OK]: id=toolu_01K45qaUJdYDKmHiKA5aecKE | (Bash completed with no output)
2026-04-22 06:52:02 [DEBUG] coder_eval.agents.claude_code_agent: >>> ASSISTANT BLOCK (ThinkingBlock): ThinkingBlock(thinking='The directory is empty. Let me create a new solution and flow project.', signature='EoMCClsIDBgCKkBhhM2FEoqytdyxdtYIRB13Nmc9B7wVugmWWky5fXDgH/p1PWZlGeO9fHaHKDzalxqXJe6H+9cMbplG
2026-04-22 06:52:03 [DEBUG] coder_eval.agents.claude_code_agent: >>> TOOL CALL: Bash | id=toolu_01HfHKy4nVCQ9q7jtG9FLRZZ | params={
  "command": "uip solution new \"TerminateParallel\" --output json",
  "description": "Create new TerminateParallel solution"
}
2026-04-22 06:52:05 [DEBUG] coder_eval.agents.claude_code_agent: <<< TOOL RESULT [OK]: id=toolu_01HfHKy4nVCQ9q7jtG9FLRZZ | {
  "Result": "Success",
  "Code": "SolutionNew",
  "Data": {
    "Status": "Created successfully",
    "Path": "/Users/religa/src/coder_eval/runs/2026-04-21_21-02-20/default/skill-flow--terminate/artifacts/skill-flow--terminate/TerminateParallel/TerminateParallel.uipx"
  }
}
2026-04-22 06:52:07 [DEBUG] coder_eval.agents.claude_code_agent: >>> TOOL CALL: Bash | id=toolu_01G38w323hL94K4jbvd9Lkj5 | params={
  "command": "cd /Users/religa/src/coder_eval/runs/2026-04-21_21-02-20/default/skill-flow--terminate/artifacts/skill-flow--terminate/TerminateParallel && uip flow init TerminateParallel --output json",
  "description": "Initialize TerminateParallel flow project"
}
2026-04-22 06:52:09 [DEBUG] coder_eval.agents.claude_code_agent: <<< TOOL RESULT [OK]: id=toolu_01G38w323hL94K4jbvd9Lkj5 | Tool factory already registered for project type 'Flow', skipping.
{
  "Result": "Success",
  "Code": "FlowInit",
  "Data": {
    "Status": "Created successfully",
    "Path": "/Users/religa/src/coder_eval/runs/2026-04-21_21-02-20/default/skill-flow--terminate/artifacts/skill-flow--terminate/TerminateParallel/TerminateParallel"
  }
}
2026-04-22 06:52:12 [DEBUG] coder_eval.agents.claude_code_agent: >>> TOOL CALL: Bash | id=toolu_01CQk13Qh2bEPwji4snqZa6d | params={
  "command": "uip solution project add \\\n  /Users/religa/src/coder_eval/runs/2026-04-21_21-02-20/default/skill-flow--terminate/artifacts/skill-flow--terminate/TerminateParallel/TerminateParallel \\\n  /Users/religa/src/coder_eval/runs/2026-04-21_21-02-20/default/skill-flow--terminate/artifacts/skill-flow--terminate/TerminateParallel/TerminateParallel.uipx \\\n  --output json",
  "description": "Add TerminateParallel project to solution"
}
2026-04-22 06:52:18 [DEBUG] coder_eval.agents.claude_code_agent: <<< TOOL RESULT [OK]: id=toolu_01CQk13Qh2bEPwji4snqZa6d | 2026-04-22 06:52:12 INFO  [ResourceBuilder:ProjectCreateCommandHandler] Creating project [object Object]
2026-04-22 06:52:12 INFO  [ResourceBuilder:MultiFileSolutionDefinitionProvider] Reading multi-file solution definition for solution %s /Users/religa/src/coder_eval/runs/2026-04-21_21-02-20/default/skill-flow--terminate/artifacts/skill-flow--terminate/TerminateParallel
2026-04-22 06:52:12 INFO  [ResourceBuilder:ProjectCreateCommandHandler] Generate artefact resources for project [object Object]
2026-04-22 06:52:12 INFO  [ResourceBuilder:SolutionsMetadataReader] Reading metadata from %s. SolutionsMetadataReader
{
  "Result": "Success",
  "Code": "ProjectAdd",
  "Data": {
    "Status": "Added successfully",
    "Project": "TerminateParallel/project.uiproj",
    "Solution": "/Users/religa/s…(148 more chars)
2026-04-22 06:52:22 [DEBUG] coder_eval.agents.claude_code_agent: >>> ASSISTANT: Now let me get the registry definitions for all node types we need:
2026-04-22 06:52:24 [DEBUG] coder_eval.agents.claude_code_agent: >>> TOOL CALL: Bash | id=toolu_019dAbG19fWaVsz8BnrvX27g | params={
  "command": "uip flow registry pull --output json 2>/dev/null | tail -5",
  "description": "Refresh registry cache"
}
2026-04-22 06:52:26 [DEBUG] coder_eval.agents.claude_code_agent: <<< TOOL RESULT [OK]: id=toolu_019dAbG19fWaVsz8BnrvX27g |     "FromCache": true,
    "AgeMinutes": 19,
    "Message": "Using cached nodes (age: 19m)"
  }
}
2026-04-22 06:52:29 [DEBUG] coder_eval.agents.claude_code_agent: >>> TOOL CALL: Bash | id=toolu_01LDDLehcRPBp7cQujT9XZPG | params={
  "command": "uip flow registry get core.trigger.manual --output json 2>/dev/null | python3 -c \"import sys,json; d=json.load(sys.stdin); print(json.dumps(d['Data']['Node'], indent=2))\"",
  "description": "Get trigger.manual node definition"
}
2026-04-22 06:52:30 [DEBUG] coder_eval.agents.claude_code_agent: >>> TOOL CALL: Bash | id=toolu_01VBvXzQwm5v4zPv7PDg5nxP | params={
  "command": "uip flow registry get core.logic.terminate --output json 2>/dev/null | python3 -c \"import sys,json; d=json.load(sys.stdin); print(json.dumps(d['Data']['Node'], indent=2))\"",
  "description": "Get terminate node definition"
}
2026-04-22 06:52:31 [DEBUG] coder_eval.agents.claude_code_agent: >>> TOOL CALL: Bash | id=toolu_01K3AxQauwxv7oLCQoXrSRcB | params={
  "command": "uip flow registry get core.logic.delay --output json 2>/dev/null | python3 -c \"import sys,json; d=json.load(sys.stdin); print(json.dumps(d['Data']['Node'], indent=2))\"",
  "description": "Get delay node definition"
}
2026-04-22 06:52:31 [DEBUG] coder_eval.agents.claude_code_agent: >>> TOOL CALL: Bash | id=toolu_016gw98nsMsBNxPZXXBtPXCx | params={
  "command": "uip flow registry get core.control.end --output json 2>/dev/null | python3 -c \"import sys,json; d=json.load(sys.stdin); print(json.dumps(d['Data']['Node'], indent=2))\"",
  "description": "Get end node definition"
}
2026-04-22 06:52:32 [DEBUG] coder_eval.agents.claude_code_agent: <<< TOOL RESULT [OK]: id=toolu_01LDDLehcRPBp7cQujT9XZPG | {
  "nodeType": "core.trigger.manual",
  "version": "1.0.0",
  "category": "trigger",
  "description": "Start workflow manually",
  "tags": [
    "trigger",
    "start",
    "manual"
  ],
  "sortOrder": 40,
  "display": {
    "label": "Manual trigger",
    "icon": "play",
    "shape": "circle",
    "iconBackground": "linear-gradient(225deg, #FAFAFB 0%, #ECEDEF 100%)",
    "iconBackgroundDark": "linear-gradient(225deg, #526069 0%, rgba(50, 60, 66, 0.6) 100%)"
  },
  "handleConfiguration": [
    {
      "position": "right",
      "handles": [
        {
          "id": "output",
          "type": "source",
          "handleType": "output",
          "showButton": true,
          "constraints": {
            "forbiddenTargetCategories": [
              "trigger"
            ]
          }
     …(525 more chars)
2026-04-22 06:52:34 [DEBUG] coder_eval.agents.claude_code_agent: <<< TOOL RESULT [OK]: id=toolu_01VBvXzQwm5v4zPv7PDg5nxP | {
  "nodeType": "core.logic.terminate",
  "version": "1.0.0",
  "category": "control-flow",
  "description": "Stop the entire workflow immediately",
  "tags": [
    "control-flow",
    "end",
    "stop",
    "terminate"
  ],
  "sortOrder": 20,
  "display": {
    "label": "Terminate",
    "icon": "circle-x",
    "shape": "circle"
  },
  "handleConfiguration": [
    {
      "position": "left",
      "handles": [
        {
          "id": "input",
          "type": "target",
          "handleType": "input"
        }
      ]
    }
  ],
  "model": {
    "type": "bpmn:EndEvent",
    "eventDefinition": "bpmn:TerminateEventDefinition"
  },
  "runtimeConstraints": {
    "exclude": [
      "api-function"
    ]
  }
}
2026-04-22 06:52:35 [DEBUG] coder_eval.agents.claude_code_agent: <<< TOOL RESULT [OK]: id=toolu_01K3AxQauwxv7oLCQoXrSRcB | {
  "nodeType": "core.logic.delay",
  "version": "1.0.0",
  "category": "control-flow",
  "description": "Pause execution for a duration or until a date",
  "tags": [
    "control",
    "flow",
    "logic",
    "delay",
    "timer",
    "wait"
  ],
  "sortOrder": 20,
  "display": {
    "label": "Delay",
    "icon": "timer"
  },
  "handleConfiguration": [
    {
      "position": "left",
      "handles": [
        {
          "id": "input",
          "type": "target",
          "handleType": "input"
        }
      ]
    },
    {
      "position": "right",
      "handles": [
        {
          "id": "output",
          "type": "source",
          "handleType": "output"
        }
      ]
    }
  ],
  "model": {
    "type": "bpmn:IntermediateCatchEvent",
    "eventDefinition": "bpmn:TimerEven…(6097 more chars)
2026-04-22 06:52:37 [DEBUG] coder_eval.agents.claude_code_agent: <<< TOOL RESULT [OK]: id=toolu_016gw98nsMsBNxPZXXBtPXCx | {
  "nodeType": "core.control.end",
  "version": "1.0.0",
  "category": "control-flow",
  "description": "Mark the end of a workflow path",
  "tags": [
    "control-flow",
    "end",
    "finish",
    "complete"
  ],
  "sortOrder": 20,
  "display": {
    "label": "End",
    "icon": "circle-check",
    "shape": "circle"
  },
  "handleConfiguration": [
    {
      "position": "left",
      "handles": [
        {
          "id": "input",
          "type": "target",
          "handleType": "input"
        }
      ]
    }
  ],
  "model": {
    "type": "bpmn:EndEvent"
  },
  "runtimeConstraints": {
    "exclude": [
      "api-function"
    ]
  }
}
2026-04-22 06:52:40 [DEBUG] coder_eval.agents.claude_code_agent: >>> ASSISTANT BLOCK (ThinkingBlock): ThinkingBlock(thinking='Now I have all the registry definitions. Let me look at the current state of the generated flow file to understand what I need to modify.', signature='EscCClsIDBgCKkCJgd56XyKRH
2026-04-22 06:52:40 [DEBUG] coder_eval.agents.claude_code_agent: >>> ASSISTANT: Now let me read the scaffolded flow file to see what was generated:
2026-04-22 06:52:42 [DEBUG] coder_eval.agents.claude_code_agent: >>> TOOL CALL: Bash | id=toolu_012nrCZYUHRQF7gZoxpLi98U | params={
  "command": "cat /Users/religa/src/coder_eval/runs/2026-04-21_21-02-20/default/skill-flow--terminate/artifacts/skill-flow--terminate/TerminateParallel/TerminateParallel/TerminateParallel.flow",
  "description": "Read the scaffolded flow file"
}
2026-04-22 06:52:42 [DEBUG] coder_eval.agents.claude_code_agent: <<< TOOL RESULT [OK]: id=toolu_012nrCZYUHRQF7gZoxpLi98U | {
  "id": "dcfe10bf-91b8-45a8-bb33-27c02264ce03",
  "version": "1.0.0",
  "name": "TerminateParallel",
  "nodes": [
    {
      "id": "start",
      "type": "core.trigger.manual",
      "typeVersion": "1.0.0",
      "display": {
        "label": "Manual trigger"
      },
      "inputs": {},
      "outputs": {
        "output": {
          "type": "object",
          "description": "Data passed when manually triggering the workflow.",
          "source": "null",
          "var": "output"
        }
      },
      "model": {
        "type": "bpmn:StartEvent",
        "entryPointId": "c10b9a33-2843-4f4a-8a0c-42636785ad63",
        "isDefaultEntryPoint": true
      }
    }
  ],
  "edges": [],
  "definitions": [
    {
      "nodeType": "core.trigger.manual",
      "version": "1.0.0",
      "cate…(1739 more chars)
2026-04-22 06:52:54 [DEBUG] coder_eval.agents.claude_code_agent: >>> ASSISTANT BLOCK (ThinkingBlock): ThinkingBlock(thinking='Now I have everything I need. Let me build the complete flow file with:\n1. start - trigger.manual (already exists)\n2. terminateA - core.logic.terminate (Branch A: immediately
2026-04-22 06:52:54 [DEBUG] coder_eval.agents.claude_code_agent: >>> ASSISTANT: Now I have all the information needed. Let me write the complete flow file:
2026-04-22 06:53:26 [DEBUG] coder_eval.agents.claude_code_agent: >>> TOOL CALL: Write | id=toolu_013Df8FSqsDAKM2tbUMH6JH6 | params={
  "file_path": "/Users/religa/src/coder_eval/runs/2026-04-21_21-02-20/default/skill-flow--terminate/artifacts/skill-flow--terminate/TerminateParallel/TerminateParallel/TerminateParallel.flow",
  "content": "{\n  \"id\": \"dcfe10bf-91b8-45a8-bb33-27c02264ce03\",\n  \"version\": \"1.0.0\",\n  \"name\": \"TerminateParallel\",\n  \"nodes\": [\n    {\n      \"id\": \"start\",\n      \"type\": \"core.trigger.manual\",\n      \"typeVersion\": \"1.0.0\",\n      \"display\": {\n        \"label\": \"Manual trigger\"\n      },\n      \"inputs\": {},\n      \"outputs\": {\n        \"output\": {\n          \"type\": \"object\",\n          \"description\": \"Data passed when manually triggering the workflow.\",\n          \"source\": \"null\",\n          \"var\": \"output\"\n        }\n      },\n     …(15554 more chars)
2026-04-22 06:53:26 [DEBUG] coder_eval.agents.claude_code_agent: <<< TOOL RESULT [ERROR]: id=toolu_013Df8FSqsDAKM2tbUMH6JH6 | <tool_use_error>File has not been read yet. Read it first before writing to it.</tool_use_error>
2026-04-22 06:53:30 [DEBUG] coder_eval.agents.claude_code_agent: >>> TOOL CALL: Read | id=toolu_018p25Ed2gNsajxsN27S279m | params={
  "file_path": "/Users/religa/src/coder_eval/runs/2026-04-21_21-02-20/default/skill-flow--terminate/artifacts/skill-flow--terminate/TerminateParallel/TerminateParallel/TerminateParallel.flow"
}
2026-04-22 06:53:30 [DEBUG] coder_eval.agents.claude_code_agent: <<< TOOL RESULT [OK]: id=toolu_018p25Ed2gNsajxsN27S279m |      1→{
     2→  "id": "dcfe10bf-91b8-45a8-bb33-27c02264ce03",
     3→  "version": "1.0.0",
     4→  "name": "TerminateParallel",
     5→  "nodes": [
     6→    {
     7→      "id": "start",
     8→      "type": "core.trigger.manual",
     9→      "typeVersion": "1.0.0",
    10→      "display": {
    11→        "label": "Manual trigger"
    12→      },
    13→      "inputs": {},
    14→      "outputs": {
    15→        "output": {
    16→          "type": "object",
    17→          "description": "Data passed when manually triggering the workflow.",
    18→          "source": "null",
    19→          "var": "output"
    20→        }
    21→      },
    22→      "model": {
    23→        "type": "bpmn:StartEvent",
    24→        "entryPointId": "c10b9a33-2843-4f4a-8a0c-42636785ad63",
    2…(2850 more chars)
2026-04-22 06:54:04 [DEBUG] coder_eval.agents.claude_code_agent: >>> TOOL CALL: Write | id=toolu_01P7EMC9g59uySy94Ja7FVS1 | params={
  "file_path": "/Users/religa/src/coder_eval/runs/2026-04-21_21-02-20/default/skill-flow--terminate/artifacts/skill-flow--terminate/TerminateParallel/TerminateParallel/TerminateParallel.flow",
  "content": "{\n  \"id\": \"dcfe10bf-91b8-45a8-bb33-27c02264ce03\",\n  \"version\": \"1.0.0\",\n  \"name\": \"TerminateParallel\",\n  \"nodes\": [\n    {\n      \"id\": \"start\",\n      \"type\": \"core.trigger.manual\",\n      \"typeVersion\": \"1.0.0\",\n      \"display\": {\n        \"label\": \"Manual trigger\"\n      },\n      \"inputs\": {},\n      \"outputs\": {\n        \"output\": {\n          \"type\": \"object\",\n          \"description\": \"Data passed when manually triggering the workflow.\",\n          \"source\": \"null\",\n          \"var\": \"output\"\n        }\n      },\n     …(15554 more chars)
2026-04-22 06:54:04 [DEBUG] coder_eval.agents.claude_code_agent: <<< TOOL RESULT [OK]: id=toolu_01P7EMC9g59uySy94Ja7FVS1 | The file /Users/religa/src/coder_eval/runs/2026-04-21_21-02-20/default/skill-flow--terminate/artifacts/skill-flow--terminate/TerminateParallel/TerminateParallel/TerminateParallel.flow has been updated successfully.
2026-04-22 06:54:06 [DEBUG] coder_eval.agents.claude_code_agent: >>> ASSISTANT: Now let's validate the flow:
2026-04-22 06:54:07 [DEBUG] coder_eval.agents.claude_code_agent: >>> TOOL CALL: Bash | id=toolu_015cZhjkmSfCHSufHM3znnaY | params={
  "command": "cd /Users/religa/src/coder_eval/runs/2026-04-21_21-02-20/default/skill-flow--terminate/artifacts/skill-flow--terminate/TerminateParallel/TerminateParallel && uip flow validate TerminateParallel.flow --output json",
  "description": "Validate the TerminateParallel flow"
}
2026-04-22 06:54:09 [DEBUG] coder_eval.agents.claude_code_agent: <<< TOOL RESULT [OK]: id=toolu_015cZhjkmSfCHSufHM3znnaY | Tool factory already registered for project type 'Flow', skipping.
{
  "Result": "Success",
  "Code": "FlowValidate",
  "Data": {
    "File": "/Users/religa/src/coder_eval/runs/2026-04-21_21-02-20/default/skill-flow--terminate/artifacts/skill-flow--terminate/TerminateParallel/TerminateParallel/TerminateParallel.flow",
    "Status": "Valid",
    "Warnings": "1 warning(s):\n  - [nodes[terminateA].outputs.message.source] [MISSING_OUTPUT_MAPPING] \"Terminate (Branch A)\" is missing output mapping for \"message\""
  }
}
2026-04-22 06:54:34 [DEBUG] coder_eval.agents.claude_code_agent: >>> ASSISTANT BLOCK (ThinkingBlock): ThinkingBlock(thinking='The validation succeeded but there\'s a warning about missing output mapping for the "message" variable on the Terminate node. This is expected because:\n1. The `terminateA` no
2026-04-22 06:54:34 [DEBUG] coder_eval.agents.claude_code_agent: >>> ASSISTANT: The flow validates as **Valid** (one expected warning since `core.logic.terminate` cannot map output variables — it aborts the workflow by design). Now let's tidy the layout:
2026-04-22 06:54:35 [DEBUG] coder_eval.agents.claude_code_agent: >>> TOOL CALL: Bash | id=toolu_019Rnwp4d7kK392MHT1UbF6P | params={
  "command": "uip flow tidy TerminateParallel.flow --output json",
  "description": "Auto-layout the flow nodes"
}
2026-04-22 06:54:37 [DEBUG] coder_eval.agents.claude_code_agent: <<< TOOL RESULT [OK]: id=toolu_019Rnwp4d7kK392MHT1UbF6P | Tool factory already registered for project type 'Flow', skipping.
{
  "Result": "Success",
  "Code": "FlowTidy",
  "Data": {
    "File": "TerminateParallel.flow",
    "NodesTotal": 4,
    "EdgesTotal": 3,
    "NodesRepositioned": 4
  },
  "Instructions": "Repositioned 4 of 4 nodes"
}
2026-04-22 06:54:45 [DEBUG] coder_eval.agents.claude_code_agent: >>> ASSISTANT: The flow is complete. Here's a summary:

---

## TerminateParallel — Build Complete ✅

**File:** `TerminateParallel/TerminateParallel/TerminateParallel.flow`

### What was built

Four nodes, three edges, two parallel branches from the manual trigger:

| Node | Type | Role |
|------|------|------|
| `start` | `core.trigger.manual` | Entry point — fires both branches simultaneously |
| `terminateA` | `core.logic.terminate` | **Branch A** — immediately aborts the entire workflow |
| `delayB` | `cor
2026-04-22 06:54:45 [DEBUG] coder_eval.agents.claude_code_agent: <<< RESULT: cost=$0.7137462, usage={'input_tokens': 21, 'cache_creation_input_tokens': 62610, 'cache_read_input_tokens': 808219, 'output_tokens': 15762, 'server_tool_use': {'web_search_requests': 0, 'web_fetch_requests': 0}, 'service_t
2026-04-22 06:54:45 [DEBUG] coder_eval.agents.claude_code_agent: session_id changed: None -> fa9abb1d-7caf-4689-b139-058095e0eccb
2026-04-22 06:54:45 [DEBUG] coder_eval.agents.claude_code_agent: Agent query stream ended
2026-04-22 06:54:45 [DEBUG] coder_eval.orchestrator: Agent response received (3633 chars)
2026-04-22 06:54:45 [DEBUG] coder_eval.orchestrator: Checking success criteria
2026-04-22 06:54:45 [DEBUG] coder_eval.criteria.run_command: Running command for criterion 'uip flow validate passes on the flow file': uip flow validate TerminateParallel/TerminateParallel/TerminateParallel.flow
2026-04-22 06:54:47 [DEBUG] coder_eval.sandbox: Command 'uip flow validate TerminateParallel/TerminateParallel/TerminateParallel.flow' exited with code 0
2026-04-22 06:54:47 [DEBUG] coder_eval.sandbox: STDOUT:
---
{
  "Result": "Success",
  "Code": "FlowValidate",
  "Data": {
    "File": "/Users/religa/src/coder_eval/runs/2026-04-21_21-02-20/default/skill-flow--terminate/artifacts/skill-flow--terminate/TerminateParallel/TerminateParallel/TerminateParallel.flow",
    "Status": "Valid",
    "Warnings": "1 warning(s):\n  - [nodes[terminateA].outputs.message.source] [MISSING_OUTPUT_MAPPING] \"Terminate (Branch A)\" is missing output mapping for \"message\""
  }
}
---
2026-04-22 06:54:47 [DEBUG] coder_eval.sandbox: STDERR:
---
Tool factory already registered for project type 'Flow', skipping.
---
2026-04-22 06:54:47 [INFO] coder_eval.evaluation.checker: Criterion 'run_command' score: 1.00
2026-04-22 06:54:47 [DEBUG] coder_eval.criteria.run_command: Running command for criterion 'Flow has Terminate + Delay nodes in parallel, terminates before delay completes': python3 $TASK_DIR/check_terminate_flow.py
2026-04-22 06:55:05 [DEBUG] coder_eval.sandbox: Command 'python3 $TASK_DIR/check_terminate_flow.py' exited with code 0
2026-04-22 06:55:05 [DEBUG] coder_eval.sandbox: STDOUT:
---
OK: Parallel branches from trigger verified
OK: Terminate + Delay nodes present; 1 element(s) terminated
---
2026-04-22 06:55:05 [INFO] coder_eval.evaluation.checker: Criterion 'run_command' score: 1.00
2026-04-22 06:55:05 [INFO] coder_eval.orchestrator: Success criteria: 2/2 passed, weighted score: 1.000
2026-04-22 06:55:05 [INFO] coder_eval.orchestrator: All success criteria passed!
2026-04-22 06:55:05 [INFO] coder_eval.orchestrator: Running post-run command: python3 $SKILLS_REPO_PATH/tests/tasks/uipath-maestro-flow/_shared/cleanup_solutions.py
2026-04-22 06:55:06 [WARNING] coder_eval.orchestrator: [post_run stderr] cleanup_solutions: deleted 7f781f34-ceb5-455d-5e4c-08dea0622efa (from TerminateParallel/TerminateParallel.uipx)
2026-04-22 06:55:06 [WARNING] coder_eval.orchestrator: [post_run stderr] cleanup_solutions: summary policy=always deleted=1 preserved=0 skipped=0 failed=0
2026-04-22 06:55:06 [INFO] coder_eval.orchestrator: Sandbox preserved (in-place): runs/2026-04-21_21-02-20/default/skill-flow--terminate/artifacts/skill-flow--terminate